| Operating temp. range *¹ | Room temp. +10~180°C | Room temp. +5~180°C |
| Temp. control accuracy *² | ±2°C (at agitation) | ±2°C (at 100°C) |
| Temp. control system | PID control by microprocessor | PlD control by microprocessor |
| Temp. setting / display method | Digital setting by the Up and Down keys | Digital setting by the Up and Down keys |
| Operation function | Fixed temperature, quick auto-stop, auto stop, auto start | Fixed temperature, quick auto-stop, auto stop, auto start |
| Additional function | Keypad lock, RE signal transmission and reception, power failure recovery, calibration off-set | Keypad lock, power failure recovery, calibration off-set |
| Heater | 1.44kW (120V) | 1.44kW (240V) | SUS316 pipeheater 1kW |
| Sensor | K thermocouple | K thermocouple |
| Safety device | Bath protection cover (ABS heat-resistant resin) | Bath protection cover |
| Self-diagnostic function (automatic overheat prevention, temperature sensor error, triac short circuit, heater disconnection, main relay failure), circuit protector, thermal fuse, micro switch to detect heating without oil | Self-diagnostic function (automatic overheat prevention, temperature sensor error, triac short circuit, heater disconnection, main relay failure), circuit protector, thermal fuse |
| Interlocking control function | RE601/801 signal transmission and reception (constant operation, heat retention operation, stop), Error report to RE601/801 | -- |
| Water tank | Capacity | ~4L | ~7L |
| Dimensions | Max. I.D.240 x bottom Dia165 x D122mm | I.D.250 x D150mm |
| External dimensions | W340 x D349 x H231mm | W310 x D360 x H230mm |
| Weight | ~5.5kg | ~8kg |
| Power source (50/60 Hz) | AC100~120V 12.5~10.5A | AC200~240V 6.5~5.5A | AC115V 11A / AC220V 7A |
*1. No load operation of bath only. Maximum temperature varies by different circumstances and operational conditions.
*2. Measured under ambient temperature at 23°C±5°C, humidity of 65%RH±20%.
*3. When combined with magnetic stirrer MB800, power source is from MB800 main unit outlet. |