Homogenize most samples in under 30 sec. For volumes from 100µl to 250ml Supplied with both 5mm and 7mm generator probes Benchmark’s new handheld homogenizer, the D1000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with…

The BeadBug™ is a high energy benchtop homogenizer that sets the performance standard for personal sized cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The…

The BeadBeater disrupts microorganisms, single-cell preparations and pulverized plant and animal tissue with better than 95 percent efficiency. Up to 80 grams (wet weight) of cells can be processed in a typical three minute run. Relying on a unique crushing or cracking action rather than high shear…

The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3,000 - 25,000 rpm for working volumes of 1 - 2,000 ml (H2O). The new tool S 25 EC-T-C-18G-ST allows temperature measurement and operation time detection through RFID. Device overheating is…

Stand-disperser (High-End Line), flexible-use disperser with power cable, PC software, RS-232 / USB connection cable Applications with the highest demands for reproducibility and scaling up can be efficiently performed with this device. The fully digitized control and regulation…

/2 Design: universal geometry of two rows of teeth, suitable for a large spectrum of laboratory applications when emulsifying, suspending, dispersing, or extracting samples. W Design:  Used for fibrious, stringy or solid samples.     Z Design:  Used for…

Thomas Nos. 1203C35 and 1203C35 The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of…

Balls made of Type 316 stainless steel For bead beating applications Use with Bead Genie™ and Disruptor Genie® Can be cleaned and reused

Fast, efficient homogenization in about 35 seconds For all sample types, from soft tissue to bone Mix up to 24 tubes simultaneously Sealed 2.0ml tubes - eliminates cross contamination The BeadBlaster™ 24 completely lyses, grinds and homogenizes a broad variety of biological…

The support stand with stainless steel rod accommodates Branson’s converter and accessories. The converter clamp supports the ultrasonic stack (converter and horn) and is easily adjusted to properly position the horn in the sample. The stand features a black enameled cast-iron base with…

The Mini-Beadbeater-96 is high-energy, high-throughput cell disrupter. In a single 1-3 minute batch run it handles up to 192 samples using a deep-well microplate format or 45 samples in 1.5 or 2 ml screw-cap microvials. In a busy day thousands of samples can be processed. The MiniBeadbeater-96…

Adapter holds 24 x 2 mL Lysing Matrix tubes. Standard adapter supplied with the FastPrep-24™ Instrument. The ergonomic design of the adapter ensures an easy loading of Lysing Matrix tubes that remain securely sealed during the homogenization. It stands stable on the bench top and is commonly…

Replacement parts, one bowl

Medium-size adapter that holds 12 x 15 mL Lysing Matrix tubes. It allows frozen samples in Lysing Matrix tubes loaded in the adapter and stored at -20°C or -80°C are ready to be immediately processed with minimal hands-on manipulation, preventing degradation of cellular components by…

The BioHomogenizer is a rotor-stator type tissue homogenizer designed to rapidly homogenize, disperse, and emulsify biological samples in aqueous media from 1 to 1000 ml. The BioHomogenizer includes both the motor and probe. The powerful 10,000 rpm motor is totally sealed and can be hand-held or…

The Mini-BeadBeater-24 disrupts microbial cells and plant and animal tissue by violently agitating four to twenty-four 2 ml screw-cap microvials containing small glass, ceramic or steel beads and 0.1 to 1 ml disruption buffer. Even resistant samples like yeast, spores or fibrous tissue are…

Cryolys Evolution is the high-end cooling system specially developed for Precellys Evolution. Its innovative patented technology allows a very efficient cooling of the grinding area using dry ice and ambient air. Thanks to the exclusive software extension for Precellys Evolution, the temperature is…

The SuperFastPrep-2™ is an attachment for a rotary tool developed for vigorous cell disruption (bead beating) and allows the researcher/investigator to process samples in the field, at the site of sample collection. It can be used to lyse microbes in soil, sediment, sludge, and fecal samples…

Small and powerful hand-held homogenizer unit For processing within various tube sizes to small beakers Made in USA and includes 2 Year Warranty High-torque motor with a variable speed adjustment, 5000 to 35000 rpm Use hand-held or post mount to a stand Offering plenty of power…

Mfr. No. PK-01200S and PK-02200S Ideal for micro-homogenizing in following tubes; 500ul, 1.5ml, and 2ml micro-tubes Volumes as small as 0.05ml can be easily homogenized in a matter of seconds 5mm flat-bottom generator probe designed for liquid and soft samples Ideal for…

For cell and tissue disruption applications such as bacteria and yeast cells Dramatically increased disruption efficiency Solid metal casting and stainless steel construction Suitable for use in cold rooms or incubators Pop off cap supplied with unit to use for vortexing single tubes Ideal…

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

/2 Design: universal geometry of two rows of teeth, suitable for a large spectrum of laboratory applications when emulsifying, suspending, dispersing, or extracting samples. /4 Design: geometry with two rows of teeth for more shear allowing for finer extractions, emulsions and suspensions. …

Tissue grinders are designed to gently homogenize fresh, soft tissue in an excess of an appropriate solvent. Most tissue grinders are made of glass or plastic. This all stainless-steel mortar and pestle (Potter-Elvehjem style) tissue grinder provides superior temperature control and greater plunger…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 30ml

* FastPrep 24 is he most advanced sample preparation system available * Provides the highest yields of DNA, RNA and proteins * Process any tissue or cellular sample type with high-quality results * Short processing times * Intuitive software, user-friendly touch screen The…

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

The Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large…

Variable speed mixer designed for reliability and durability. Durable—no wear user serviceable parts  Low/no maintanence brushless motor  Adjustable tilt from 0 to 30 degrees allows proper propeller placement  IP44 rated per IEC 60529  Hollow through shaft and…

24 x 2mL QuickPrep 3 Sample Holder for use with FastPrep Homogenizers.