Instruments Electrical
-
Powerstat with ACE Warning Glow
Ace GlassSuperior Electric Powerstat & reg; with Ace Warning Glow variable output transformer. Autotransformers have one wire continuous from input to load. If this wire is incorrectly connected to the "hot" side of the service, a 110-120v potential exists between it and the ground. Reversing…
-
ESD Audit Kit With METRISO®B530
Transforming TechnologiesThe ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits according to IEC 61340-5-1 and for qualification / verification of ESD control elements
-
Vibration Meter
ExtechThe VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. VB450 features a wide 10Hz to 1500Hz frequency range and provides…
-
Spartan Series Continuous Monitors
Transforming TechnologiesThe Spartan Series Continuous Monitors provide ongoing verification of the wrist strap system and the work surface ground. The Spartan system eliminates the need for routine wrist strap testing and documentation and alarms when failures occur, greatly reducing the risk of ESD damage between tests.…
-
UVA Light Meter
ExtechThe Extech UV510 UV light meter measures UVA light radiation from natural and artificial light sources. It offers a backlit dual display, cosine corrected sensor, two selectable ranges, zero function, min/max recording, display hold, and auto power off. Compact size with handy wrist strap gives you…
-
Transform select Extech meters to a datalogger! The 407001-PRO software allows you to live stream data from compatible meters to a desktop or laptop PC. Collected data can then be used to generate reports, graph data points, and to share with others on your team. Data can be viewed as a list or on…
-
The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA…
-
SRM200 Digital Surface Resistance Meter
Transforming TechnologiesSRM200 is a very useful instrument for checking surface resistance and resistance to ground. The instrument can be used on different work surfaces, floors, chairs, carts, clothing and packaging materials, etc. The measured value is displayed with LED display that indicates whether the value is…
-
Tests up to 1000VAC with visual/audible indication 75 to 1000VAC input voltage with 45 to 65Hz frequency range LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously…
-
Two Sided Probe Kit
Transforming TechnologiesThe 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique two sized design combines a concentric ring probe and a cylindrical disk probe into one easy to use…
-
Compact Auto Ranging Clamp Meter
Sper ScientificThis clamp meter offers all the features you need to fit the way you work. The small bodies and jaws fit perfectly in your hand and into tight places. Meter controls are positioned so that current measurements can be done with one hand. A large backlit display is easy to see, and the handy display…
-
AC Ionizing Gun
Transforming TechnologiesThe BFN®G10 ionizing gun combines portability, fast static decay rates, excellent balance and low compressed air consumption to efficiently remove static and contaminates in the Semi-conductor, Electronic Assembly, Medical Device, Optics, Automotive and Pharmaceutical markets. The BFN®G10…
-
Extension Rod for Electrodes
Transforming TechnologiesExtension set with T-handle Note: Can be used only with Model 870 probe
-
Veribox - Resistor Box for Verification
Transforming TechnologiesThe veribox contains resistors for the verification of high resistance tester before use
-
Walking Test Kit with Computer Interface
Transforming TechnologiesTest and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has been designed to perform a voltage measurement of floor materials and footwear in combination with a person according to ANSI/ESD STM 97.2.…
-
IDP-STAT® Permanently Dissipative Badge Holders
Transforming TechnologiesThe IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Made from permanently dissipative IDP-STAT® PVC film, these badge holders will never fail in the field and become a potential ESD threat. The ESD protection makes them safe for use in…
-
Measure earth ground in 4 ranges from 2 to 2000 Ohm 4-wire, 3-wire, and 2-wire testing Large dual line LCD Automatic I (current) and P (potential) spike check Test Hold function for easy operation Autoranging, Automatic Zero adjustment, Data Hold and Auto Power off AC Earth…
-
Combination Ground Tester with RS232 Interface
Transforming TechnologiesThe PGT120.COM personnel grounding tester takes quick and accurate resistance measurements of the ESD grounding products with the ability to integrate with a computer to store test data. Access to this information is valuable to your quality program. The unit operates with 3 independent measuring…
-
Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…
-
Dual Conductor Resistance Monitor, 2 Operators + 2 Mats, Network Ready
Transforming TechnologiesThe CM2815 Series dual conductor workstation monitor provides complete ESD protection to two operators by monitoring both resistance and voltage independently using dual conductor wrist strap. It also monitors ESD mat ground and low resistance of tool chassis' ground simultaneously. Utilizing…
-
Extech’s DCP36 Power Supply offers 80W constant power topology and Auto Ranging Voltage and Current outputs. This compact, lightweight unit provides easy portability, and is ideal for tight workbenches with limited space. It features two 4-Digit LED displays, 3-programmable presets,…
-
-
The TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.
-
600A Compact AC Clamp Meter
ExtechThe MA610 is a fully loaded clamp meter with multimeter functions including AC Current, AC/DC Voltage, Resistance, Frequency, and Capacitance. It also has a built-in non-contact voltage (NCV) detector to quickly check circuits and wires for live voltages. Complete with test leads, three AAA…
-
Multi-Field EMF Meter
ExtechThe EMF450 is a convenient 3-in-1 EMF meter which simultaneously measures and displays Magnetic Field, Electric Field and Radio Frequency Strength. Ergonomic pocket-sized design with an easy-to-navigate menu. Large vivid color TFT display shows digital readings, bargraphs, and trending graph.…
-
Bluetooth Light Meter
Sper ScientificStandalone light meter that can also wirelessly display, log and transfer readings to your iOS or Android smartphone. Sper Scientific’s Bluetooth Light Meter is small, light, and simple to use with results displayed on the meter’s large, bright backlit display. Choose readings in lux or…
-
The EX655 is a 600A True RMS AC/DC Clamp meter. This clamp meter also measures AC/DC voltage, resistance, capacitance, frequency, temperature, continuity/diode test and has an NCV detector. The EX655 has a 1.18" jaw size which accommodates conductors up to 350 MCM. This meter also features a…
-
Calibration Unit for PGT® 120
Transforming TechnologiesThe PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers. The PGT120.CU is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.…
-
AC/DC Magnetic Field Meter
ExtechThe MF100 is an AC/DC Magnetic Field Meter. This magnetic field meter features automatic temperature compensation with Hall effect sensor. Product complete with uniaxial magnetic probe sensor and protective cover, 9V battery and hard carrying case.
-
3 Axis EMF Meter
Sper ScientificSimply approach the source at any angle and the triple-axis meter automatically determines EMF (electro magnetic frequencies), eliminating the need for additional calculations. X, Y, and Z axis results can also be viewed independently. Measures electro magnetic fields of extremely low frequency…
-
Sper Scientific Direct Solar Power Meter
Sper ScientificEnables precise measurement of solar radiation power for the manufacture and installation of solar panels and environmental applications. Results appear in W/m2 or BTU/ft2 on a triple tier backlit display which shows a continually updated minimum, maximum or average reading. The display also shows…
-
Basic Mini Environmental Quality Meter
Sper ScientificMonitor up to 3 environmental parameters with one tiny instrument: Wind Speed, Air Temperature, Relative Humidity (RH). Light weight, tiny size with simple, one-hand, operation. They are perfect for scientists, agricultural specialist, facilities managers, HVAC professionals, home inspectors, field…