GC Equipment & Instruments
Some instruments within this category offer cuvettes which is essential equipment for accurate gas sampling and analysis. The design of these products can ensure of reliable results in gas chromatography applications.
Vial racks are an excellent solution to organizing your sample handling and storage. The racks available can offer 2 mL vials for streamlined processing.
The electronic leak detector is a vital safety device, enabling the quick identification of leaks in GC systems, ensuring the accuracy of experiments, and safeguarding of lab personnel. Magnetic seals play a critical role in maintaining system stability and performance, essential for consistent chromatographic results.
Our GC equipment and instruments are designed to optimize gas chromatography processes. This range improves lab efficiency and safety and is compatible with other lab equipment.
-
Bruker® SampleJet NMR tubes
MilliporeSigmaWilmad NMR tubes with authentic Bruker® SampleJet(TM) caps without code, up to 600 MHz. Do not use with ceramic spinners. Synonyms: nmr sample tubes; nmr tubes Legal Information: SampleJet is a trademark of Bruker-Physik AG
-
SPME fiber assembly polyacrylate (PA) df 85 mum
MilliporeSigmaOther Notes: partially crosslinked phase
-
-
Made of high-quality stainless steel Meet or exceed original manufacturer's performance
-
1/16" Valco Adaptor Ferrules
RestekValco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require. Fused silica adaptor ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize…
-
3 Port SST Assy, 8L For Vertical OHD Vessels
Bellco Glass45mm 3-Port Assembly for 1964 style for OHD vertical side arm vessels, 8L and 15L Specifications: Sealed Weld - Electropolish Finish Supplied With 45mm S/Cap & White Silicone Liner 316L SST Material, Ra 32 Finish Or Better 1 - Siphon Tube; 15" Long 1 - Fill Tube; 2 17/64"…
-
SNOOP® Liquid Leak Detector
MilliporeSigmaSustained bubble action works even on very small leaks and vertical surfaces. Flexible snooper tube extends for hard-to-reach areas. Does not contain chlorine, aliphatic amines, or ammonium compounds. Dries clean, without staining. Legal Information: SNOOP is a registered trademark of Swagelok…
-
Turn in-house compressed air into ultra-pure air (<0.1 ppm total hydrocarbons) Remove hydrocarbons to less than 0.1 ppm by catalytic oxidation Operate at 40–125 psi (276–862 kPa) Typical payback is less than one year, based on cylinder costs Install easily and take up…
-
Disposable UV-grade methacrylate cuvettes
MilliporeSigmaEconomical UV-grade methacrylate disposable cuvettes. Select either grooved non-optical walls for better grip or four-sided clear walls. All cells have a 10 mm pathlength and are supplied without stoppers.
-
Inlet Liner Removal Tool
RestekEasily remove liner from injector—no more burned fingers Made from high-temperature silicone Won’t chip or crack the liner
-
-
Photoionization (PID) Lamps
RestekModel 108-10.0/10.6 offers both 10.0 and 10.6 eV potential, has a 0.781" base diameter, and is used in Tracor, OI, and Baseline instruments. Model 103 has a 1.375" base and is used in HNU and SRI detectors. Model 108-BTEX lamp’s higher output makes it ideal for detection of BTEX compounds.
-
Pistons and Seals
Agilent TechnologiesAgilent pistons are made from a high purity, monocrystalline sapphire for maximum durability. Although ceramic pistons can be manufactured at a lower cost, ceramic is a sintered, polycrystalline material, which can cause undesirable variations during the production process. Agilent seals are…
-
Scoring Wafer with Handle
RestekCeramic wafer is straight-edged for cutting fused silica tubing cleanly Unique, ergonomic handle is made of soft, comfortable rubber
-
-
Bulk GC Supplies
Agilent TechnologiesAgilent bulk chromatography supplies provide the best of both worlds: small, easily handled quantities in economical bulk packaging. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…
-
PSD Spares and Supplies
Agilent TechnologiesProgrammable Sample Dispensers (PSD) used with Graphite Furnace AA. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
WJ L/P OHD Vessel W/4 SA,3L
Bellco GlassIdeal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: #4 Hose Barbs For 1/2" Id Tubing Material: Type 1 Class A Borosilicate Glass Supplied: 45mm Polypropylene Blue Cap & Pouring Ring Size 3-6L
-
POLYGOSIL® Irregular silica, Octyl phases
MACHEREY-NAGELPOLYGOSIL® Irregular silica phases for LC, C18 (ODS) modified for reversed-phase (RP) applications Features Irregular silica for analytical application, pH stability 2–8 Available pore sizes 60, 100, 300 and 1000 Å Available particle sizes 5 µm, 7 µm…
-
Purge/Trap K Vocarb® 3000 for use with Encon
MilliporeSigmaPurge/Traps K Vocarb® 3000 (for use with Encon) efficiently trap analytes in US EPA Methods 502.2 and 524. Legal Information: Vocarb is a registered trademark of Siemens Industry, Inc.
-
-
OVHD Drive Vessel,8L
Bellco GlassManufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 polypropylene blue screw caps 45mm and pouring rings, also 1 polypropylene blue cap 100mm for the center. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Graduations: 8-36L Sidearms:…
-
Tube, GC Collection
Ace GlassMicroscale gas chromatography collection tube for fraction collection followed by transfer of sample to 9590-02, 0.1mL, Conical Vial for storage. 5/5 inner joint on tube allows direct connection to heated exit port of GC column via 9571-40 Stainless Steel Connection- Adapter. Inner joint…
-
Supeltex® M-4 Packed Column Ferrule
MilliporeSigmaSupelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.Characteristics: Seals at one-quarter turn past fingertight. Maximum sealing surface contact, reduced risk of column contamination at installation.Material Composition: flexible…
-
Ideal for high-flow split applications >500 mL/min. Washerless, leak-tight seals
-
FEP sample tube liner Wilmad
MilliporeSigmaThin-wall FEP liner minimizes filling factor losses of using inserts and protects NMR tube from etching effects of strong acids containing fluoride ions. Liners are 8 in. L and fit snugly into most common 7 in. L thin-wall tubes. A PTFE plug to close each liner is included. Not recommended for…
-
Easily attach your purge-and-trap with pre-installed low dead volume fittings.
-
Wilmad® NMR tubes
MilliporeSigmacaps included. Synonyms: Wilmad nmr tubes; nmr sample tubes; nmr tubes Legal Information: Wilmad is a registered trademark of SP Industries