Ideal for taking samples from low and medium viscosity liquids, the Liquid Master is available in a range of lengths and diameters to give a range of sample volumes. Product Contact Material Available in: 316L Stainless Steel, Food Grade PTFE/FEP, Polypropylene. Available in a large variety…

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…

This hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic…

3M™ Sponge-Sticks are available in wet or dry formats, with and without gloves, to fit many applications. The 1.5" x 3" 3M Sponge-Stick allows sampling without directly handling the sponge. Stick-mounted sponge design allows the ability to access hard to reach areas without…

PEEK Sample Loops avoid many of the problems associated with stainless steel sample loops. Metal loops will often absorb sample components resulting in inaccurate quantitative results. In addition, metal loops may be corroded by high-salt buffers and chloride salts. Sample Loops are made from PEEK…

Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with…

Nujol is used for solid sample preparation for transmission infrared spectroscopy.

Available in two lengths to suit your needs, these sterile liquid thieves draw a sample with a simple pull of the handle, then dispense easily into the vessel of your choice. Ideal for sampling water and other low viscosity liquids, oils and ointments; 0.15cm (¹⁄16") tip hole…

Twelve-inch rim dip net is fitted with a heavy canvas bag approximately 6½" deep Bag attached to metal frame with clamp rings Bottom of bag is a mesh material of approximately 500 micron nylon Canvas skirt extends three inches below bag bottom to protect mesh Aluminum pole…

Our range of stainless steel beakers are made from high grade 316L Stainless Steel. Available in 4 convenient sizes in a polished finish. Ideal for use in the laboratory or production environment. These multi-purpose 316 stainless steel beakers are ideal for the collection and storage of powders…

The SteriWare Powder Thief is the ideal choice for taking samples from containers of powder. These disposable devices have become an extremely popular choice due to their simple operation and guarantee of cleanliness. Made from FDA and EC conforming HDPE, these samplers are individually bagged…

Manufactured from chemically-resistant polypropylene, this sampling device is perfect for corrosive environments and for hard to reach places A 500 mL bottle screws into the end of the 6 foot handle and is filled via four ports (two allowing liquid to enter and two allowing air to escape) …

Microbial content and diversity within collected gut, rectal, vaginal, skin, oral, or soil samples can provide a wealth of clues about human and animal health. However, current microbiome collection methods subject the samples to harsh and stressful stabilization techniques such as freezing or…

For taking a large volume, cross sectional sample from a container. This all layer sampler has a robust all stainless steel construction and is suitable for sampling free flowing powders, granules and even slightly cohesive powders. Made from high quality 316L stainless steel. Cross…

Measuring scoops of polypropylene and polyethylene in a variety of sizes. Volume marked in mL on the handle.

Heavy duty construction Made from 316L Stainless Steel Crevice free Satin finish Rounded corners for easy cleaning GMP Correct A366-1 All 316L Stainless Steel A366-11 316L Stainless Steel Body and 304 Stainless Steel Handle

The Sludge Judge® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic…

The LaboPlast® Bio disposable spoon made of green PE is produced in our clean room of class 7 (10,000) and individually wrapped in bio-PE film for disposable use. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is manufactured from renewable raw…

Fully welded handle design provides enhanced durability Constructed of durable stainless steel Smooth surface ideal for food sampling High quality mirror polish allows for easy cleaning These Cole-Parmer® Essentials stainless steel industrial scoops feature a fully welded handle for…

The PerkinElmer probe/waste/vacuum line assembly is used in chemical laboratories.

suspending Radiello triangular support plate, pk of 20

Sorbent Tube, Anasorb CSC, Coconut Charcoal, 6 x 70-mm size, 2 sections, 50/100 mg sorbent, 20/40 mesh, with GS ends and FFW separators, fits Type A tube cover.

The vacuum assisted Digi FILTER assembly provides a quick and easy way to filter samples prior to analysis.

Convenient For food-borne pathogen testing A low cost, effective and convenient absorbent sponge designed for environmental surface sampling of work areas, equipment and any other places where testing for Listeria, Salmonella and other food-borne pathogens is required. Sponge is free of…

The SteriWare Blue Disposable Scraper is ideal for use with foodstuffs, cosmetics and pharmaceuticals. The ergonomic design means they are easy to use. Ideal for scraping, cleaning and many other uses. Key Features: Moulded & packed in a Medical Cleanroom Individually bagged…

Replacement probes for ESI autosamplers. All perfluoroalkyl (PFA) wetted sample flow path reduces contamination and provides chemical resistance.

Ideal for collecting environmental surface sampling without touching the sponge. Polypropylene handle allows maximum contact of the sponge with the sampling surface and helps with the collection of hard-to-reach surfaces, around corners and irregular shaped areas. The PolyProbe™ is…

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually wrapped for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The…

This range of heavy duty Stainless Toggle Drums from Sampling Systems are ideal for storage and production. As standard they come with a fully welded handle, silicone seal (FDA Grade) and lid. The lid is secured with pull down latches (toggle clamps). Manufactured from high grade 316L Stainless…

The new SteriWare V-Spatula Collection from Sampling Systems are ideal for sampling powders. Available in a range of widths and lengths there is a perfect spatula for every application. Key Features: Moulded & packed in a Medical Cleanroom Individually bagged in ultra-strong…

Sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. The scaled sample container can be used for an exact measurement and it shows contents up to 50 ml or 1.5 oz.…