Tissue Grinders
-
The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either…
-
Disposable Tissue Grinders
Biomedical PolymersGamma Sterilized Closed system can grind specimen in sealed container to prevent contact with sample Molded in abrasive surface does not leave sediment System comes fully assembled and Gamma sterilized Available in three models Tissue grinding system is designed with safety and…
-
These motor-driven PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet…
-
BioVortexer
BiospecThe BioVortexer is a lightweight, battery powered unit designed to be used with microcentrifuge tubes. Centrifugal pellets, precipitates, and other solids are completely dispersed in seconds by a combination of mechanical and vortex action. A new polypropylene stir rod is used with each sample. …
-
Micro-Mill® II Grinder
SP Bel-ArtThe Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…
-
Duall Tissue Grinder With Glass Pestle
DWK Life Sciences (Kimble)Combines both conical and cylindrical surfaces to effectively reduce tissue and produce a uniform homogenate Ideal for connective tissue, such as muscle, heart and lung Clearance between pestles and tubes is 0.004 to 0.006 inches* Pestle can be motor driven (see Thomas number…
-
These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…
-
Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…
-
Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…
-
Micro Grinder
Glas-ColNo sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…
-
Concrete Cylinder Molds
Gilson Co. Inc.Biodegradable Plastic Cylinder Molds for single-use applications are non-absorptive and molded as single piece units for dimensional uniformity. Rugged molds have unlimited shelf life and are weather-resistant, but contain a unique additive that allows microbes present in landfills and composting…
-
Test Sand, ASTM 20-30
HumboldtSand is specially graded natural silica sand to pass a No. 20 (850µ) sieve. Specific gravity is 2.65 Packed in 50 lb. (22.7kg) bags
-
Potter-Elvehjem-Type Tissue Grinders with PTFE Pestles
DWK Life Sciences (Wheaton)Wheaton 33 low extractable borosilicate glass Precisely constructed with completely interchangeable parts Especially for use in preparation of tissue homogenates, etc. PTFE pestle for soft tissue Grinding chamber clearance is 0.1 - 0.15 mm Unit can be autoclaved …
-
For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…
-
Denville Ultra EZgrind™ Tissue Homogenizer
Ultra EZgrind™The Denville Ultra EZgrind™ Homogenizer Line is perfect for customers continually homogenizing small volume samples with little variation in sample size. 125 Watt Lab Homogenizer with 7mm Steel Generator Probe
-
1 ml Tissue Grinder, Tapered, Gnd
DWK Life Sciences (Wheaton)These tapered tissue grinders have an improved design, which incorporates a longer tapered surface on both the mortar and pestle. The conical surface allows initial size reduction followed by passage through the cylindrical section for the final homogenization step. Grinding efficiency is improved,…
-
Thomas Pestle Tissue Grinder Assemblies with Serrated Pestles
labForce® (powered by Thomas Scientific)Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…
-
A 10 basic Analytical Mills
IKA WorksThe redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill…
-
These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…
-
These PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene…
-
5 ml Tissue Grinder, Potter-Elv
DWK Life Sciences (Wheaton)These grinders are precisely constructed with completely interchangeable parts to allow easier cleaning or replacement of damaged mortars. They are designed for use in preparation of tissue homogenates, and other similar applications. The Teflon® pestle is for soft tissue such as brain or…
-
Potter-Elvehjem Tissue Grinder With PTFE Pestle
DWK Life Sciences (Kimble)Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…
-
10 ml Tissue Grinder, Potter-Elv, Coated
DWK Life Sciences (Wheaton)Wheaton Safe-Grind plastic coated tissue grinders afford an added measure of safety over uncoated glass tissue grinders. The heavy plastisol coating protects the mortar from becoming scratched or checked, and assures you of a sure grip. More importantly, the plastic coating creates a greater safety…
-
Tissue Grinder 2ml PE Serrated Pestle
DWK Life Sciences (Wheaton)This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don't need to keep pieces matched during cleaning.…
-
Micro Tissue Grinder Kit
DWK Life Sciences (Wheaton)Complete kit of six tissue grinders: 0.1, 0.2, 1, 1, 2, and 1 mL Packed in a lightweight protective carrying case Glass-to-glass ground surface homogenizes connective tissue. Teflon ® units suitable for soft tissue. Dounce Tissue Grinder is supplied with two interchangeable pestles for large…
-
These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…
-
Tapered 1mL Tissue Grinder with Teflon Pestle
DWK Life Sciences (Wheaton)Borosilicate glass Especially for soft tissues Stainless steel rod is long enough to chuck into a suitable drive motor
-
Micro-Sized, 0.1 mL Tissue Grinder
DWK Life Sciences (Wheaton)Borosilicate glass Designed for delicate hand operation and extremely precise work Clearance between pestle and tube 0.1 - 15 mm Reservoir and pouring lip incorporated into design
-
Medium Riffle-Type Sample Splitters
HumboldtThe Humboldt Medium, Riffle-type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such…
-
These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…
-
Humboldt, Riffle-type sample splitter with removable hopper can be used to divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material…