UV-Vis Chromatography Cells
-
Agilent Holmium Oxide/Didymium Glass Filter Kit
Agilent TechnologiesThe Agilent Technologies holmium oxide/didymium glass filter kit is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be…
-
Variable Angle Transmission Holder
Agilent TechnologiesAllows transmittance measurements of solid samples at various incident angles. The sample can be positioned through 360 degrees to the incident beam and is selectable to 1 degree. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis. Front Mounted,…
-
Temperature Probe Holder
Agilent TechnologiesThe Agilent Technologies temperature probe holder is suitable for use in 10 mm standard rectangular cuvettes. Application: For Use in Standard 10 mm Rectangular Cuvettes This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Screwdriver
Agilent TechnologiesThe Agilent Technologies #2 Pozi Kincrome screwdriver of 38 mm length, is suitable for general repair and maintenance purposes. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Macro Cells
Agilent TechnologiesThe macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…
-
Magnetic Stirrer Bar
Agilent TechnologiesMagnetic stir bars or star type stirrers provide uniform and thorough mixing of samples in cuvettes. The stir bars are recommended for the stirring module and Peltier thermostatted (1 x 1) cell holder. The star stirrer is recommended for Peltier thermostatted multicell holders for Cary UV-Vis…
-
FID Interface board
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Cell Accessories
Agilent TechnologiesSpacers are required to hold cells with an outer depth of less than 12.5 mm in the cell holder. For use with Agilent 89054A cell-stirring multicell transport and Agilent 89090A Peltier temperature controller. Stirring bars are used with cells having internal dimensions of 10 x 10 mm (W x D)…
-
Solid sample mounting plate, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Cary 50 Dissolution Tubing Spares Kit
Agilent TechnologiesAgilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S.…
-
Tube PTFE 0.088 od x 0.056 id in.Natural
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Didymium Standard for UV Cert. to USP857
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Cuvette Holder
Agilent TechnologiesAllows transmittance measurements of solid samples at various incident angles. The sample can be positioned through 360 degrees to the incident beam and is selectable to 1 degree. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is…
-
Replaceable Probe Tip
Agilent TechnologiesReplaceable probe tip, Torlon, 40mm pathlength. 7.9 mm diameter. Suitable for use with the Torlon probe body (p/n 7910032600) or the Torlon fiber optic dip probe with the replaceable tip (p/n 7910035100). The tip is suitable for operation in temperatures up to 200 °C. Application: For Use With the…
-
Sample holder 1in round Cary7000 UMS/UMA
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Agilent Cell Base
Agilent TechnologiesThe Agilent Technologies cell base is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Rectangular Ultra-Micro Cell
Agilent TechnologiesQuartz, open top with PTFE lid supplied, self-masking black walls, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Rotor Seal
Agilent TechnologiesOptimize performance and maximize efficiency with supplies for the sample handling accessories used with 8453/8454 UV Systems. These ensure the perfect fit to ensure the optimum productivity and reduced errors caused by manual cell handling. Application: Accessory Supplies for 8453/8454 UV…
-
Filter Kit
Agilent TechnologiesThe Agilent Technologies filter kit is used in linearity calibration routines, for proper instrument and DRA calibration. It is compatible with Cary 5/500 systems. Application: For Cary 5/500, Used With Linearity Calibration Routines to Ensure Instrument & DRA are Correctly Calibrated This…
-
HPLC flow cell, 4 x 0, microbore, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Cuvette Holder
Agilent TechnologiesAgilent offers a range of cell holders, providing you with the ability to analyze a wide variety of samples. Standard, cylindrical, long pathlength, and variable pathlength cell holders, bases and test tube holders are all available for Agilent UV-Vis and UV-Vis-NIR systems. Application: For…
-
PCI Interface Card
Agilent TechnologiesThe Agilent Technologies PCI interface card is suitable for use with Agilent Cary 50 UV-Vis spectrophotometer. Application: For Agilent Cary 50 UV-Vis Spectrophotometer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
PTFE tube for RSA, 0.042mm id. Per m
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Sample holder 8in round Cary7000 UMS/UMA
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Emission filter kit, set of 9
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Diffuse Reflectance Wavelength & Wavenumber Standard
Agilent TechnologiesThe Agilent Technologies certified diffuse reflectance wavelength and wavenumber standard is suitable for use in spectrometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Fluorescence Microplate
Agilent TechnologiesAgilent 96- and 384-well high binding microplates have high binding surfaces that bind medium and large biomolecules (greater than 10 kDa) that have hydrophobic and/or ionic groups. These microplates are recommended for the Cary Eclipse Fluorescence Microplate Reader Accessory. They are available…
-
Acetone Standard for UV cert. to USP857
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Loom - Cary 1/3 D2 lamp extension
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Diffuse Color Standard Spectralon
Agilent TechnologiesSpectralon diffuse color standards, calibrated, red, green, blue, yellow, for highly stable reproducible spectral reflectance, 2 in diameter. Application: For Highly Stable Reproducible Spectral Reflectance This product is only available to U.S. Domestic Customers. For research use only,…
-
Calibrated Solution Validation Test Kit
Agilent TechnologiesAgilent UV-Visible calibration standards and kits provide an inexpensive and time-saving solution for calibrating and qualifying your UV-Vis instrumentation. The reference material kits were developed for analysts who need to conform closely to both quality and regulatory requirements when…
-
Agilent IEEE Cable Cover
Agilent TechnologiesThe Agilent Technologies IEEE cable cover is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.