Electronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…

The IKA C-Mag HS 7 control has a square top made of ceramic. It stirs volumes of up to 20L (H₂O) and runs at speeds ranging from 50-1500rpm. IKA’s stands strongly by its product and technology and is offering a lifetime warranty for this product – scientists can focus on…

For drawing the material to be mixed from above Stirrers generate axial flow in the vessel Minimum danger of injury when contact is made with vessel Minimum shearing forces Used at medium to high speeds Additional stirrers available on special order

The Phipps & Bird state-of-the-art programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities: Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm…

This strong, non-scratch and inert FDA grade, USP Class VI Teflon® PTFE blade fits all standard button-tip stirring shafts. "Long-groove" keyhole provides easy insertion into flask neck Rotates into proper position for stirring action

Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The straight glass blades are spaced 90° apart and angled 15°.  PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.

Even the smallest daily helper should inspire and accompany you for many years. That is the reason for our magnetic stirrers to be uncompromising when it comes to quality and reliability. The Hei-PLATE magnetic stirrers impress through a sealed and fireproof housing and a unique Kera-Disk®…

OHAUS offers four models for stirring capacities between 25 to 200 L allowing you to choose the right model for your application. The broad top plate surface allows processing of oversized vessels such as carboys for your large volume stirring. The powerful magnetic drive is also capable of mixing…

Eliminates spark, shock hazards All-plastic construction Corrosion-proof Speed range: 0-800 rpm Usable in hazardous locations, baths, incubators or other areas where electric stirrers are impractical Operates on water or air pressure between 15 and 40 psi. Knob regulates…

Uniquely designed and lubricant free, these precision stirrer/stirring bearings are self-aligning. The saddle O-ring provides constant force and a positive seal on the stirring rod that allows vacuum operation to as low as 1mm. Ground finish rods from other manufacturers are not recommended for use…

Designed to meet mixing requirements for varying viscosities and volumes Feedback circuitry to maintain speed when viscosity changes Reference circuitry to maintain speed even with voltage fluctuations of ±10% Cord connections between drive motors and controls Stirrers filter the drive…

Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high-performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo…

Powerful, mechanically controlled laboratory stirrer designed for highly viscous applications for quantities up to 80 l (H2O). It is suitable for intensive mixing for use in laboratories and pilot plants. The stirrer comes equipped with a protection for overheating of the motor by means of…

Precision ground glass stirring shaft, 10mm OD, attached vanes. Vanes will fit through a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical…

The AREX 5 is a robust and versatile hotplate stirrer suitable for applications ranging from basic to temperature-sensitive where precise sample thermoregulation is required. The AREX 5 can work stand-alone or be upgraded to digital by connecting the VTF digital temperature controller. …

The VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.

Stirring shaft with steel core. Use with PTFE stirrer guides and for applications which do not require a guide. Unbreakable, scratch resistant, and usable up to 280C.

These Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful…

Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8” wide flat.  Please Note: CG-2097-75 and CG-2097-100 are made from heavy wall tubing…

Precision ground glass stirring shafts,10mm OD, crescent type. Useful for stirring viscous materials at low rpm. Available for round bottom flasks of 1, 3 and 5 liters. Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings…

High viscosity agitator, made entirely of PTFE and glass filled PTFE, provides excellent stirring at the bottom of 2L through 20L reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled PTFE safety pin. Heavy…

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…

Agitators are made entirely of PTFE and glass filled PTFE and are for use with 30mm OD stirrer shaft CG-2097 in 75 and 100L reactors. The 45°; angle impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. The upper agitator hub is open so that…

The unique design of our Tru-Stir™ stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical stainless steel spring permitting up to 1/4” of offset misalignment and…

Stirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…

Precision ground glass stirring shafts, 10mm OD, button type, PTFE coating permits higher stirring speeds with Trubore bearings. If used unlubricated, 500 rpm max with water-cooled 8040 bearing. Compatible with 8036, 8038, 8039, 8043, 8047, 8051, 8055 and 13443 bearings. Button type shafts accept…

The classic: Now with new design, functions and features. Wide speed range from 0/50 - 1700 rpm Integrated temperature control Incl. PT 1000 temperature sensor (PT 1000.60) Exact temperature and speed setting via digital display, even when switched off Set safety temperature…

Optimize your stirring needs and workspace with this completely customizable stirrer. Attach up to 10 stir plates based on need Simple touch and slide operation LCD display with real time parameters Corrosion-resistant glass stir top Waterproof USB attachments This unique…

Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

Caframo’s ultra torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor.  A unique two speed transmission provides incredible amounts of…