Adapter M, 1/4in (6.4 mm) External Screw Thread, 4mm Outer Diameter Nipple for FIAS-100, FIAS-400, FIAS-400MS and AS-93 Plus/S10 Rinsing Kit

These 20 mL polypropylene tubes, with screw caps, have an outer diameter of 20 mm and are designed to provide excellent chemical resistance.

DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml, up to 200 ml. An ergonomic handle and a spout on both sides for right or left-hand operation make handling simple and easy. …

The spoon spatula is a double spatula with a 0.5 ml spoon and a 17 mm spatula blade. The spoon spatula has many different uses in labs – as a sampling spoon, for measuring or transferring small amounts, as a scraper or for mixing and stirring. Specially designed for disposable use,…

Economical Bowls are constructed from 204Cu Stainless Steel for corrosion resistance at a lower cost.  Bowls features a polished mirror surface foreasy mixing and cleaning.  Can withstand temperatrues up to 1400°F (760°C). Meets NSF standards.

The SiloPicker is ideal for taking bulk goods samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m. The insertion depth depends on the density of the bulk goods. Stainless steel AISI 316L (1.4404)

Tray-Spill Metal

The SteriWare ViscoThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. This is the ideal sampler for creams, pastes, gels and ointments. The single use ViscoThief is a…

iSWAB-Discovery is a DNA collection kit for humans or animals that can capture samples producing robust yields of double stranded, long fragmented DNA from buccal cells using traditional swabs. iSWAB-DSC is essentially identical to iSWAB-DNA but requires only a single swab and is more cost…

Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…

ST Nebulizer probes connect directly to any ST-type nebulizer. The 1/4-28 threaded fitting provides a secure, zero-dead-volume connection with no additional fittings required. 80 cm- capillary length after the probe to the nebulizer connection period.

Zone sampler Spiralus guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the…

Amber tinted to protect samples from damage of light exposure; inert to normal preservative Large handle for easy transportation Custom cap and neck design help prevent leaking Accurate scale allows for proper measurement ceasing the need to transfer samples into a graduated…

It is possible to carry out point sampling of liquids of varying viscosity with the stainless steel Liquid CupSampler AISI 316L (1.4404). Media-containing particles can also be sampled without difficulty. The sampler can be used in the fields of chemistry, foodstuffs and cosmetics. The cup…

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually wrapped for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and…

Heavy duty construction Made from 316L Stainless Steel Crevice free Satin finish Rounded corners for easy cleaning GMP Correct A366-1 All 316L Stainless Steel A366-11 316L Stainless Steel Body and 304 Stainless Steel Handle

135 mm- probe support length (length of carbon fiber) 80 cm- capillary length after the probe to the nebulizer connection

The LaboPlast® disposable spoon made of polystyrene is produced in our clean room of class 7 (10,000) and individually wrapped for disposable use. The spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders,…

Sampler for pourable bulk goods up to approx. 1 cm in diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks. Also for coarse-grained bulk goods Made of stainless steel AISI 316L (1.4404) Special geometry of the tip

To create a more comprehensive profile of our health and wellness vs. disease, multiple analytes need to be included in the analytical mix such as DNA, RNA, proteins, and cell morphology. Unfortunately due to the limitations of current sample collection practices this means multiple samples need to…

High dividing accuracy Dividing heads ensure flexibility in application Simple and fast handling by innovative snap fit system Speed monitoring and constant speed control Ideal fo research, development, quality control laboratories, retained or documentary samples for chemical…

Sampler for ground water samples from wells, pits and other sources. Fits all normal well shafts with control openings to Ø 2", without tilting or getting stuck. Ultra pure materials guarantee the highest degree of sample purity. Easy to clean thanks to rounded edges and threads. …

The ChemoSampler was developed for sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can…

The range of GL45 containers have the advantage that the lid can be fully removed for full cleaning. The lid comes with a built in adapter to mate with standard GL45 threads. These containers are available in a variety of sizes and come as standard with a highly polished finish. Multi…

The Sampling Systems™ Powder Trier (cereal trier) is ideal for taking a large volume, cross sectional sample from containers, sacks or silos. The sampler has a robust all stainless steel construction and is suitable for sampling cereals, grains, free flowing powders, granules and even…

radiello™ Starter Kits

The SteriWare™ Long Handled Spoon is ideal for reaching into large containers or difficult to reach places. Each spoon has a robust 300mm handle. The bowl is available either with a straight or an offset profile (to aid pouring for right handed operators). Moulded & packed in…

Safely sample and dispense corrosive liquids with these high-density polyethylene plastic ladles. Rigid bowl has a handle securely welded at an ergonomically efficient angle

Used for installing the auto sipper accessory (N4101012).

Manufactured in 316L stainless steel with a silicone seal (FDA grade). Available in; 600mm, 1000mm and 1500mm lengths. Sample volumes; 160ml, 300ml and 450ml. Easy to clean. Operation Insert the sampler into the liquid. Pull the handle to take the sample. Withdraw…

Cover Gasket to house the stopcocks are available for purchase with either 12 or 24 stopcocks options.