Site Search

Compare Tool

Select up to 3 products

  • Image of Dish Tongs

    Humboldt
    Item #:
    3821G45

    Handles dishes and other articles from 3 to 4-3/4" (75-120mm), Stainless Steel, 9-1/2" (241mm length).

  • Image of Aluminum Moisture Dish

    Humboldt

    Inverted slip-in cover with beaded edge for tight sealing, can be handled with crucible tongs. Inside dia at top 2-1/4" x 3/4" deep (57mm x 19mm). Drawn aluminum construction.

  • Image of Standard Burner with Air Regulator Only & Flame Stabilizer

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch...

  • Image of Mortar & Pestle (Plattner's)

    Humboldt
    Item #:
    6883L10

    Hardened alloy tool steel, for crushing hard, brittle materials such as ores, minerals, etc. Mortar 76 mm diameter x 25 mm high Cavity 30 mm diameter x 9.5 mm deep, fitted with precisely machined, removable sleeve for holding crushed material in cavity Pestle 76 mm long x 25 mm diameter; fits...

  • Image of Flask Tongs

    Humboldt
    Item #:
    9395Q11

    Max. opening 1-7/8"(48mm), Stainless Steel, 1/4"(6mm) Wire Size, 9"(229mm) length

  • Image of Support Rings

    Humboldt

    Wire Models and Extension Rings Wire Models Formed, bright basic wire circle is welded to shank (except 2" size). Aluminum muff. Attaches to support rods up to 3/4" (19mm) in diameter. Extension Rings Shank of Extension Ring clamps to support rods with clamp holder. Manufactured from...

  • Image of High-Temperature Burners

    Humboldt

    When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for...

  • Image of Torch Support

    Humboldt

    The Torch Support turns hand torches into an adjustable position blast burner. This instantly detachable support is constructed of plated brass with heavy cast iron tripod base and pedestal connected by a universal ball joint to a clamp that fits on the torch handle. The unit is equipped with...

  • Image of Cork Borer Sets with Handles, Plated Brass Set

    Humboldt

    These inexpensive sets are used to bore holes in corks and rubber stoppers. They consist of plated tubing with precision ground cutting edges. The smooth plastic handles are stamped with a number designation. A punch is included with each set.

  • Image of Pipe Mounting-Type Burner

    Humboldt
    Item #:
    2064K10

    Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 Overall Height: 6-1/2"...

  • Image of Cork Borer Sharpener

    Humboldt
    Item #:
    1195A07

    This handy tool is used to sharpen borers from 3/16" to 15/16" (5mm to 24mm). The solid brass cone has a hinged steel blade in a slot; mounted in a hardwood handle.

  • Image of Multi-Blade Cork Borer Sharpener

    Humboldt
    Item #:
    1195A08

    Hollow ground cutting blades in a conical arrangement for fast, effective sharpening of cork borers. Blades are hardened tool steel for long life.

  • Image of Cork Press

    Humboldt
    Item #:
    1195A09

    The Cork Press is a rotary compression device used for softening and tapering corks ranging in sizes from 0 to 22. The unit is cast aluminum and can be wall or bench mounted. Overall dimensions: 10-3/8" W x 5-3/8" H x 3-1/4" D (264mm x 137mm x 83mm).

  • Image of Cork Boring Machine

    Humboldt

    Designed to mount on any tabletop, the Humboldt Cork Boring Machine has an adjustable guide that permits holes to be bored in any part of a stopper. The knurled chuck accommodates the 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. The steel borers range from 3/16" to...

  • Image of Cork Borer Sets with Handles, Plated Steel Set

    Humboldt

    These inexpensive sets are used to bore holes in corks and rubber stoppers. They consist of plated tubing with precision ground cutting edges. The smooth plastic handles are stamped with a number designation. A punch is included with each set.

  • Image of Screw Compressor Clamp, Closed-Jaw C-Clamp

    Humboldt
    Item #:
    2848D13

    Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.