Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting…

Designed for general qualitative laboratory work Fast filtering speed; 25um particle retention Low retentivity, which retains coarse or gelatinous precipitates such as aluminum hydroxide, cobalt carbonate, mercury iodide and magnesium hydroxide Creped surface; thickness approximately…

Quantitative cellulose filter papers are primarily used in gravimetric analysis procedures and perform separations by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media family is also widely used in methods to prepare samples for further…

I.W. Tremont offers a diverse product line of high quality membrane filters available in a variety of materials, diameters and pore sizes and suitable for a wide range of applications including cell retention, In Vitro Diagnostics, particle collection, clarification and sterile filtration of…

Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…

A deep black, qualitative paper for filtering light colored sediments, etc. Medium speed Retains crystalline precipitates of medium fineness 6 µm pore size

Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28…

Ahlstrom 480 is a hydrophobic silicone-impregnated paper intended for phase separation.

Depth filtration glass micro fiber GRADE A-E - Fine porosity and fast flow rate, with a 1.0 µm size particle retention. Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm …

Ahlstrom offers a full range of standard pleated grades that meet your needs from grades with rapid flow rates for filtration of viscous materials to grades with tight matrices for removal of fine precipitates. Ahlstrom’s pre-pleated grades can save valuable time and maximize the efficiency…

Depth filtration glass micro fiber GRADE B - Fine porosity, medium to fast flow rate, with a 1.0 µm size particle retention. Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation. This material is twice as thick as Grade A with a higher loading…

Depth filtration glass micro fiber GRADE F - Fine porosity, medium flow rate, with a 0.7 µm size particle retention. Frequently used with Grade D to filter diluted aqueous solutions containing strong oxidizing, acidic, or alkaline components prior to laser spectroscopy. May also be used for TCLP…

100% pure borosilicate glass microfibers; contains no binders or additives High loading capacity Consistent uniformity and excellent weight repeatability Rapid flow rate Particle retention range: 0.7 - 3.1 µm Chemical and thermal resistance (up to 550°C) Long shelf life GRADE…

Depth filters with high particle loading capacity. Made of 100% borosilicate. Temperature resistant up to 500 °C. Typically placed directly on top of other membrane filters to act as a prefilter; or may be used to filter solutions directly.

Ahlstrom’s qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still…

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation…

Ahlstrom's qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still…

Ahlstrom offers a full range of standard pleated grades that meet your needs from grades with rapid flow rates for filtration of viscous materials to grades with tight matrices for removal of fine precipitates. Ahlstrom’s pre-pleated grades can save valuable time and maximize the efficiency…

Ahlstrom’s qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still…

Qualitative cellulose filter papers perform separation by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media is widely used in methods requiring the determination and identification of particulate in both liquids and gas. Also, this natural…

Ahlstrom manufactures high quality analytical filter papers for use in specialty end use applications. These custom designed qualitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water. Ahlstrom specialty analytical filter papers include pleated and…

Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…

Ahlstrom-Munksjö offers a full range of standard pleated grades that meet your needs from grades with rapid flow rates for filtration of viscous materials to grades with tight matrices for removal of fine precipitates. Ahlstrom-Munksjö's pre-pleated grades can save valuable time and maximize the…

Depth filtration glass micro fiber GRADE E - Fine porosity, fast flow rate, with a 1.3 µm size particle retention. This material is an economical media for suspended particle analysis in water, cell harvesting, pre-filtration and air monitoring applications. Binderless borosilicate…

Depth Filtration Glass Micro Fiber GRADE D - Coarse porosity, fast flow rate, with a 2.7 µm size particle retention. Well suited for higher volume and repetitive laboratory filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass…

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are…

Highly absorbent white fiber paper Lint and dust free Recommended for drying microscope slides and other small lab glass items

ValuSep® 5um Glass Micro Fiber (GMF) prefilters are made of two separate layers of glass fiber in a very thin format for highly efficient capture and retention of particles that could prematurely clog an SPE filter.

Ahlstrom 615 has a rough surface and is used for filtering aluminum, ferric and magnesium hydroxides. It is also found in general construction filtration work and in the filtration of insoluble iron and ore. Filtration Speed Herzberg sec/100mls: 29 Loading Capacity: High

Suitable for routine gravimetric analysis and typical preparation of samples for use in analysis involving instrumental techniques. Low ash grades have intermediate ash content between qualitative grades and ashless grades. Grade 392 is medium to slowly filtering and used for fast filtration…