Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

Resists most aqueous solutions, acids and bases Steam sterilizable Can be used from -45° C to 110° C Centering ring holds bottle from wall Large carrier accommodates 2.5 L and 4 L bottles. Small carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance,…

Reinforced nylon rack is autoclavable and chemical resistant Fits 1.5mL and 2.0mL microtubes Single piece construction Molded handles facilitate secure handling Alphanumeric markings for sample identification Stackable Dimensions (L x W x H): 24-Place rack: 143 x 90 x 52mm…

Denville freezer boxes for 15ml and 50ml centrifuge tubes:   For 15ml Tubes For 50ml Tubes Plastic boxes R8126 R8121 Cardboard boxes R3020 boxes + R1600-15-PK dividers R3020 boxes + R2000-16D-PK dividers Metal Freezer Storage…

For use as Stand-alone units or with Ice Pans *not compatible with CoolSafe

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

Corning Microcarriers are designed to simplify your scale-up processes. The microcarriers are sterile, ready to use, and available in closed systems packaging to be used directly with bioreactors. Additionally, the microcarriers are surface treated to enhance cell attachment, maximizing cell yield…

High pressure for 96 well inserts, microliter has a full line of lc and gc chromatography consumables and can help you determine the best products for your application.

Constructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…

The Clinical 4-Way Tube Rack is the only tube rack specifically designed to hold round, flat & conical blood collection and culture tubes. It holds multiple tube sizes without multiple racks.  

Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…

Organize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low (-80 deg) freezers on the market; racks are designed for ultra low upright freezers. Crystal is an industry leader in Freezer Racks, producing the largest…

ABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height…

The CRYSTAL 81 cell chest freezer rack measuring 5-1/2 Inch x 5-5/8 Inch x 15-1/16 Inch, features sturdy construction which ensures durability. It holds up to 7, 2 Inch standard boxes. Rack features box and divider for easy and convenient organizing of sample storage. Application: For Standard 2…

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 9/16? (39.6mm) Tube Size: 38mm Spacing: 2x6 Holds 12 Tubes Dimensions: 10" X 3 1/2" X 2…

Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

Flame Retardant Color: Charcoal Long wearing Chemical and solvent resistant Float on H20 bath with full tube and sample Ideal for refrigerated or frozen storage samples All tubes can be decanted simultaneously Low profile: Will not tip over easily Lightweight: Weighs less…

Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Station (H0381): Holds up to four wash bottles; Rotates 360°…

Rack Hydrometer Polypropylene Tall ( 1212X17 ) Product Dimensions (l x w x h) : 7.812x8.5x10in 7 in plate height tall Hydrometer Racks. These 18 place polypropylene racks are specially designed to safeguard glass hydrometers. The three tiered rack with handles allows easy transport and…

Cannister frames are constructed with corrosion resistant stainless steel and include handles.

Store 81 tubes in a 9x9 format.

Upright Freezer Drawer Rack for 96 deep well plates, 7 x 5 capacity 35 plates 25 x 10 1/8 x 5 7/16" (L x H x W)

Works with 35mm ID hybridization bottles Ideal for transportation and storage Acrylic construction holds up to 6 bottles

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter

In addition to cryogenic freezer equipment, we supply upright freezer racks, chest freezer racks, liquid nitrogen freezer racks, canisters / cassettes and frames as well as laboratory boxes and dividers. By understanding the needs of the biotechnology industry, Custom Biogenic Systems provides…