Buffers

Compare Tool

Select up to 3 products

1 - 32 of 1917
Sort
View
Show
  • Color-Coded pH Buffer Solutions

    chemForce™ (a Thomas Scientific Brand)

    Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • Choose from economical solution bottles or individually sealed pH buffer pouches. NIST traceable materials Labeled with pH vs. temperature tables for accurate calibration All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to…

  • Hach calibration pH buffers are available in a variety of color-coded or colourless solutions, in different packaging types and sizes from 15 mL up to 20 L. pH buffers are also available in convenient single-use pouches (Singlet) and unit-dose powder pillows for on-site and field analyses ensuring…

  • Color-Coded pH Buffer Solution Set

    chemForce™ (a Thomas Scientific Brand)

    Size: 3 x 500 mL Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Color coded Physical State: Liquid pH: 4, 7, 10 Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • Tris-EDTA-NaCl Buffer solution at pH 8.0. A customer enquired about this buffer to make as custom and we also added as a new product. Features Precision in concentration and pH Guaranteed reproducibility Applications As a buffering mix

  • Clear pH Buffer Solutions

    chemForce™ (a Thomas Scientific Brand)

    Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • BUFFER SOLUTION

    MilliporeSigma

  • 1M TRIS-HCl, pH 9.8

    Quality Biological

    Suitable for molecular biology, protein chemistry, and biochemical applications. DNase, RNase and Protease tested. Filtered through a 0.22 µm membrane DNase, RNase, and Protease tested Applications Tris Buffer, 1 M pH 9.8 is commonly used in SDS-PAGE and Electrophoresis applications.

  • Composition: Water 89.71%, Sodium Sulfate Anhydrous 9.36%, Sodium Carbonate 0.94% Boiling Point: Approximately 100°C Density: 1.07 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …

  • ROSS™ All-in-One™ pH Buffer Kit

    Thermo Scientific Orion

    Maintain pH electrodes more effectively with Thermo Scientific™ Orion™ ROSS™ All-in-One™ pH Buffer Kits. Convenient buffer kit includes 4.01, 7.00 and 10.01 buffers, ROSS storage solution, cleaning solution and storage bottle. Kit includes one each: 1 pint…

  • Colored pH Buffer Standards

    Inorganic Ventures

    Inorganic Ventures' pH Standard is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date.

  • Components: Sodium Phosphate Monobasic / Sodium Phosphate Dibasic(200 mM) Method: Prepared in 18.2 megohms-cm ± 1 low endotoxin water and filtered through 0.22-micron filter. pH: 7.4 ± 0.15 Storage: Room Temp.

  • Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…

  • Components: Sodium Phosphate Dibasic(100 mM), Potassium Phosphate Monobasic(20 mM), Potassium Chloride(27 mM), Sodium Chloride(1.37 M), Tween-20(1%), Sodium Azide(0.02%), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and autoclaved at 15 psi (121°C) for 30 minutes on…

  • MDL No: MFCD00146206 Liquid

  • 10 mM Tris-HCl

    Teknova

    Tris-HCl, Tris Hydrochloride, is a buffer for molecular biology, protein chemistry, and biochemical applications. Prepared buffer solutions provide a time-saving and convenient option. Contains 10 mM Tris-HCl at either pH 8.0 or pH 8.5.

  • Components: Tris Base / Tris-HCl(1 M), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 9.5 ± 0.2 Storage: 2-8°C

  • Sorensen's Phosphate Buffer

    Electron Microscopy Sciences

    (Phosphate Mixed Sodium Salts) CAS #: 10049-21-5,  7782-85-6, 22800-01/05 Sorensen, see Dawson et. al, (1969) Sodium Phosphate, dibasic (Na2HPO4xH2O) Sodium Phosphate, monobasic (NaH2PO4xH2O) 0.2M, pH range 5.8…

  • Elution Buffer

    Omega Bio-tek

    Elution Buffer. 10 mM Tris-HCl pH 8.5 For Research Use Only. Not for use in diagnostic procedures.

  • femto TBST™ and femto PBST™ will enhance sensitivity of your immunoassays by minimizing the "washing out" of immuno agents or immuno complexes, a common problem associated with classical TBST and PBST buffers. The wash buffers aid in the generation of cleaner backgrounds,…

  • Corning® 3D Clear Tissue Clearing Reagent The improved in vivo relevancy of 3D cell culture has driven the adoption of these models in drug discovery. However, the imaging techniques used to characterize these models are highly limited. Due to the thickness and opacity of these 3D cellular…

  • HOCOC6H4COOK CAS#: 877-24-7 F.W.: 204.23

  • Formulated as 5X rather than the traditional 2X stocks, SDS Protein Gel Loading Solution 5X enables a larger volume of sample to be loaded per well. 5X concentrated protein gel loading buffer Applications Simply load the gel sample wells and visualize progress of the electrophoresis run by…

  • Components: Sodium Chloride(127 mM), Potassium Chloride(5 mM), Sodium Phosphate Monobasic(1.8 mM), Magnesium Chloride Hexahydrate(1 mM), Calcium Chloride Dihydrate(1 mM), Sodium Bicarbonate(25 mM), Dextrose / Glucose(5.5 mM), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and…

  • Tris, Reagent Grade

    MP Biomedicals

    Tris is relatively non-hygroscopic; however, if needed, Tris Base can be dried at 100°C for up to 4 hours to remove any water. Neither Tris Base or Tris Hydrochloride by themselves provide adequate buffering capacity. Generally the two need to be mixed together to provide a buffer with pH…

  • Buffer Solution at pH 4.0 at 25% red/yellow/blue color coded. 500mL poly bottle. Traceable to NIST and not regulated for DOT.

  • MOPS Buffer (1 M, pH 8.5)

    Boston BioProducts

    Components: MOPS(1 M), Sodium Hydroxide(-), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 8.5 ± 0.15 Storage: 2-8°C

  • Tris HCl Buffer Solutions

    Bio Basic Inc.

    Tris HCl Buffer 0.5M Solution, Sterile pH 6.8 Tris HCl Buffer 1M Solution, Sterile pH 7.0 Tris HCl Buffer 1M Solution, Sterile pH 7.5 Tris HCl Buffer 1M Solution, Sterile pH 8.0 Tris HCl Buffer 1M Solution, Sterile pH 8.5 Tris HCl Buffer 1M Solution, Sterile pH 9.0 …

  • Dilu-Lok II™, Phosphate Buffer with Magnesium Chloride, dilution blank, 90ml fill, 145ml polypropylene bottle with hinged cap Phosphate buffer with magnesium chloride meets or exceeds requirements for APHA, EPA water and wastewater methods, and the dairy industry. The pH is 7.2 +/- 0.2 …

  • Components: Sodium Phosphate Monobasic / Sodium Phosphate Dibasic(0.5 M), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 9.0 ± 0.15 Storage: Room Temp.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.