Cabinets and Accessories
-
Sitting Height Base Cabinet, Left Hinged
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Standing Height Base Cabinets with 4 Drawers
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Cabinet Fillers
INSTOCK LabsCorner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall. Rear and Center Fillers are used between back-to-back…
-
Modular Workstation G1 includes: (2) 72" Lab Bench Full Height (84) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Full Height Worktop - Epoxy Resin, Beveled Edge, Black (2) 72" Lab Bench Upper Shelf 15"D (2) 72" Lab Bench Lower Shelf 15"D (2) 72"…
-
Suspended Cabinets with 4 Drawers
INSTOCK LabsSuspended Cabinet is designed to be hung from an INSTOCK table. Each suspended cabinet is furnished with complete hanging hardware.
-
End Supports
INSTOCK LabsPanel End Supports are to be used in place of a cabinet at one end of a cabinet run to support drawer frames or apron rails. Can be used to support the intersection of two aprons or rails.
-
32 3/8" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Standing Height Base Cabinets, Right Hinged
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Vent Kit For Acid Storage Cabinet
LabconcoUsed for venting the Protector Acid Storage Cabinet through the SpillStopper Work Surface and into the fume hood. Includes one plastic vent tube assembly complete with 2" diameter threaded connection locknut, flexible tubing and vent extension
-
Standing Height Sink Cabinets with 2 Doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Protector Vacuum Pump Storage Cabinets provide an enclosed space for storing vacuum pumps. Durable, glacier white powder-coated steel construction complements laboratory casework and Labconco fume hoods. Features: a single, manual-closing, non-locking door with left or right hinge; one 115V, 60 Hz…
-
Solid 1 Door Wall Cab
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. Solid door wall cabinet…
-
Sinks
INSTOCK LabsThese durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …
-
-
Knee Space Panel 22"D
MacBickFormed of heavy guage cold-rolled steel. Designed to fill the open area under the apron at rear of cabinet.
-
Solid 1 Door Wall Cab
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. Solid door wall cabinet…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC03 standing height base cabinet…
-
Steel Box Apron 2 Drawer 22"D
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with two drawers at 22"D.
-
Apron Frames with Drawer
INSTOCK LabsApron Drawer with Drawer are used to span a knee space area between two cabinets. Attachment hardware is included.
-
Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…
-
Steel Pipe Enclosures
INSTOCK LabsPipe Enclosures are used to provide a cover for pipes running from the ceiling to the work surface. This enclosure can be used for island or perimeter locations. They can support pegboards or water purification systems. The cover is pre-punched for attachment and is furnished in three…
-
Modular Workstation D1 includes: (2) 72" Lab Bench Full Height (84) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Full Height Worktop - Epoxy Resin, Beveled Edge, Black (2) Lab Bench Lower Shelf, Epoxy Resin, 30 sq ft, Beveled Edge, Black (2) 72" Lab Bench upper Shelf…
-
1 Drawer / 1 Door Cab
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC40 standing height base cabinet…
-
Faucet and Aerator
INSTOCK LabsFoot Operated faucet is deck mounted with a vacuum breaker. Faucet is chrome plated with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats. Faucet has a floor mounted foot operated valve. DI/RO faucet is deck mounted for distilled, deionized or…
-
Set includes four leveling glides.
-
Rear Wall Cabinet
INSTOCK LabsRear Wall Cabinet Fillers are used to close the space between the rear of the wall cabinet and wall created by the hanging rail. The filled is only needed when the end of the cabinet is exposed.
-
Set includes four HD leveling casters rated at 550lbs.
-
Modular Workstation B1 includes: (1) 18" D00 Standing Height 3-Drawer Base Cabinet (1) 18" C03 Standing Height Single Door Base Cabinet (2) 36" E40 Standing Height 1-Drawer / 2-Door Base Cabinet (1) 36" A00 Steel Box Apron 22"D with Full Overlay Applique (1) 36"…
-
Cabinet Base Molding
INSTOCK LabsCabinet base molding is installed directly on the toe-kick of a base cabinet and is the final step in installing a lab to create a finished look. The base molding has a self-adhesive back for easy application.
-
Wall Cabinets
INSTOCK LabsWall Cabinets are to be hung on a wall typically above a run of base cabinets. Wall cabinets come with two adjustable shelves and feature a flush bottom. Each wall cabinet includes a hanging rail.
-
Manual Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC03 standing height base cabinet…