Lab Condensers
Condensers are good for cooling vapor and condensing it back into a liquid form, recovering solutions by cooling and condensing the solvent vapors.
Temperature-controlled environments can maintain reactional temperatures and improve process control during applications where this is required.
At Thomas Scientific, we offer a range of condensers with various application suitability. All carry specially formed spiral tubes that provide a vapor path to ensure excellent heat transfer and anti-flooding features to ensure clear and precise results.
Multiple shape and sizing options are available, including a vertical condenser, detachable condenser, and a Friedrichs condenser, which makes them compatible with other laboratory equipment.
-
SYNTHWARE Allihn Condensers with Removable Hose Connections
Kemtech AmericaAllihn Condenser, Removable Hose Connections Jacket Length: 120, 200, 300 or 400mm Joints: 14/20, 24/40, or 29/42 Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has an additional 19/38 outer joint sealed onto the condenser to allow continuous feed of volumes exceeding the capacity of the evaporating flask.
-
Condenser, Spiral
Ace GlassWith spiral condensing tube having both inlet and outlet connections at top, on same side. With standard taper joints. Length between joints is approximately 80-90 mm longer than the stated coil length.
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.
-
SYNTHWARE Grahm Condensers
Kemtech AmericaGraham Condenser Joints: 14/20, 19/22 and 24/40 available Jacket Length: 120, 200, 250, 300 and 400mm available Hose Connections: 8 or 10mm available **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Micro cold finger condenser with drip tip on bottom for directing drops into the well of 14/10 jointed 9576 or 9599 Hickman Stills. Cold water is introduced into cold finger periodically by means of a Pasteur pipet. Complete item consists of cold finger condenser and multi- purpose vacuum adapter…
-
This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is…
-
Condenser, Friedrichs
Ace GlassReflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.
-
Findenser - Super Air Condenser
HeidolphFindenser comprises of an internal glass condenser and an external, finned aluminum jacket, between which a small amount of water is permanently sealed. The glass condenser is designed to have a greater internal surface area than traditional condensers, giving it increased heat transfer capacity.…
-
Condenser Liebig Standard Joints
GSC International, Inc.Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have standard joints. We also sell Liebig condensers with rubber connections or ground glass joints . PRODUCT WARNINGS Our products…
-
These PYREX® West condensers are designed with a 190mm long jacket that has a 14/20 Standard Taper top joint. The bottom has 14/20 Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tubulation O.D. is approximately 10mm. This condenser is a…
-
SYNTHWARE Bubbler
Kemtech AmericaWith small ball joints to prevent mineral oil being sucked back under sudden negative pressure in the system.
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
Condenser, Air Reflux
Ace GlassMicroscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with various joint sizes at bottom and top. Available with hose barbs or Ace-Safe connectors.,/p>
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and joint at bottom and top. Jacket length 250mm. Available in various joint sizes with hose barbs or Ace-Safe connectors.
-
Reflux Condensers
ChemglassReflux condenser having an internal coil that is water jacketed. Vapors are condensed both on the coil and the inner wall of the jacket. The top end has a standard taper outer joint and the lower end has an inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Allihn Condensers
ChemglassAllihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
By closing stopcock, serves as a reflux condenser; open serves as a still head for Claisen type distillation. Top joint can be used for thermometer or cold finger condenser insertion. Side vent enables head to be used in vacuum distillation. Jacketed section 140mm.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Liebig Condensers
ChemglassCondenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
SYNTHWARE West Condensers
Kemtech AmericaWest Condenser Joints: 14/20, 19/22, and 24/40 available Jacket Length: 110, 190, 200, and 300mm available Narrow annular space for fast collant speed thus high cooling efficiency.
-
PYREX Liebig Condensers
CorningWith Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads.
-
Graham Condensers
United Scientific SuppliesGraham condenser is designed for use in distillation applications. Constructed of borosilicate glass, this condenser has a coiled inner tube to provide additional surface area for highly efficient cooling. Socket is 24/40 with a screw thread connector.
-
Condenser, Long Path
Ace GlassTurbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.
-
Coil Condenser, "A" Assembly
ChemglassDouble coil condenser for use with rotary evaporators for cooling with tap water in a diagonal position. Condenser has a 50mm O.D. flange at the bottom, a 19/38 top valve, and removable hose connections using GL-14 glass threads. Condenser is supplied complete with plastic caps and serrated hose connections.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads. Condenser is supplied complete with PTFE centering ring along with plastic caps and…
-
Coil Condensers
ChemglassFor use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.
-
Liebig Condensers
DWK Life Sciences (Kimble)Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8” ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Borosil® Allihn Condensers
BorosilBorosil® Allihn Condensers have an interchangeable inner and outer joint with a drip tip. The Allihn Condenser has a more surface area than the Liebig, with a series of bulbs which generates a higher cooling capacity. This condenser is ideal for laboratory scale refluxing. There is an inlet and…