General Chromatography

Compare Tool

Select up to 3 products

HomeAll Products

General Chromatography

1 - 32 of 2426
Sort
View
Show
  • Adapters-1, 3 and 6ml, 15/pk

    Agilent Technologies

  • Pure cellulose produced entirely from the highest quality cotton linters with no additives of any kind. Ensures that no contamination will occur during the transfer steps. Manufactured and tested specifically for chromatographic and blotting techniques. This ensures the wicking capability and…

  • Manufactured for specific instruments Provide better seal Sized for appropriate liners Seals are manufactured to fit specific inlet liners for specific instruments to provide the best possible seals for reproducible conditions. Graphite seals are recommended for use at…

  • Caps close end of fractional tubing Plugs close unused port of fractional tubing Available in brass or stainless steel

  • Grade 4 Chr cellulose chromatography roll is a 0.21 mm paper for routine and/or repetitive chromatography when loadings are relatively low. Pure cellulose produced entirely from the highest quality cotton linters with no additives of any kind. Manufactured and tested specifically for…

  • Available in three different sizes Mixed packing bed prevents improper installation Easily refillable Tested to 150 psi (helium) Both inlet and outlet connectors are equipped with stainless steel frits to prevent particulates from entering the gas stream. Indicating 4Å…

  • FlashPure Select cartridges are packed the highest quality silica designed to help maximize performance on any flash purification instrument. Large selection of cartridge sizes Several choices of particle size Non-RFID suitable on any system FlashPure Select cartridges are…

  • Pure cellulose produced entirely from the highest quality cotton linters with no additives of any kind. Manufactured and tested specifically for chromatographic techniques. This ensures the wicking capability and uniformity of capillary action that are important in chemical separations. Also…

  • SPME Fiber Holder

    Agilent Technologies

  • FlashPure ID cartridges are packed with high quality silica designed to help maximize performance on BUCHI Reveleris chromatography systems. Large selection of cartridge sizes Luer lock inlet Luer slip outlet RFID tag tracks cartridge use and history Standard FlashPure ID…

  • Agilent Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared…

  • O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600°F (315°C)

  • Fitting to your needs and environment The Pure chromatography instruments are extremly compact, ensure safety on the highest level and are easy to use for any flash or prep HPLC application. The platform has been designed to protect you and your sample and to get more purification in a very…

  • Gas Clean Kit for 8890 and 8860 GC

    Agilent Technologies

  • CAP - UV-Cuvette Micro 100 pcs

  • Tubing Cutter

    Agilent Technologies

    Tubing cutter, for plastic or PEEK tubing.

  • Grade 2 Chr cellulose chromatography sheets is a 0.18 mm paper for higher resolution applications. Pure cellulose produced entirely from the highest quality cotton linters with no additives of any kind. Manufactured and tested specifically for chromatographic techniques. This ensures the…

  • Deactivated (silanized) glass inlet liner for capillary injection ports. Fits Agilent (5890, 6890, and 7890) Fits Finnigan (9001GCQ) Fits Varian (CP-1177 Injector) The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a…

  • FlashPure EcoFlex cartridges are packed with quality silica designed to help maximize cost and performance on any flash purification instrument. Large selection of cartridge sizes Several stationary phases available Luer lock inlet and Luer slip outlet Non-RFID suitable on any…

  • Fused Silica Tubing Cutters

    Agilent Technologies

    Conveniently designed, pencil-shaped tool and a ceramic wafer that allow you to make clean and easy cuts in fused silica, glass and aluminum-clad capillary columns.

  • Meter Valves

    Swagelok

    2000 psig pressure rating Temperature rating - 149°C (brass), 204°C (stainless) 1/8“ and 1/4“ tube fittings Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service. The handle dead stop is factory…

  • Ball Valves

    Swagelok

    2500 psig pressure up to 60°C 1/8" and 1/4" tube fittings Fully open or fully closed operation only Brass or stainless steel valves allow bi-directional flow, have virtually no dead space and are easily cleaned or purged. One-piece body eliminates multiple seal points.…

  • Ferrule Tools

    Agilent Technologies

    Ferrule Tools Tools are designed to remove ferrules stuck inside fittings. Screw the stainless steel ferrule tool into the ferrule and pull it out. Use the smaller capillary ferrule tool for capillary column ferrules (0.32 mm ID column and smaller). The megabore ferrule tool is for megabore…

  • Please note: Compatible with ESI press-fit PFA spray chamber connection.

  • 5mL disposable syringe 100/pk

    Agilent Technologies

  • Topaz GC inlet liners feature revolutionary technology and inertness to deliver you the next level of True Blue Performance: Deactivation —unbelievably low breakdown for accurate and precise low-level GC analyses Reproducibility —unbeatable manufacturing controls and QC…

  • Chiller Coolant Mix 30 Plus-Five 1/2 Gal

  • Concentration: 10,000 µg/L Matrix: 5% HNO3 Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…

  • Agilent Choice Liners

    Agilent Technologies

    Agilent’s engineering and testing efforts focus on these parameters when designing liners for Agilent inlet systems. Intensive liner development and testing have resulted in a set of liners that are recommended whenever new methods are being developed, when methods are being optimized, or…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.