Shelving

Compare Tool

Select up to 3 products

1 - 32 of 166
Sort
View
Show
  • Adds convenient space above a storage unit. Drop mat design creates a retaining ledge around the entire 12" (305mm) deep shelf. Remember to order rear posts taller than front posts to accommodate these shelves.

  • Bookend Brackets

    INSTOCK Labs

    Bookend brackets can be sued with island stanchions or wall standards to support shelves. Brackets are of a 14 gauge steel construction.

  • Chrome Wire shelf dividers keep shelf contents orderly. These are 8" tall, pressure fit dividers. Stainless Steel Wire shelf dividers keep shelf contents orderly. These are 8" tall, pressure fit dividers. Chrome Wire shelf ledges prevent items from protruding or falling from…

  • Reagent poles are 1" diameter painted steel poles that are threaded at both ends. Poles bolt through the work surface for secure mounting. Reagent poles can stack to create tiered phenolic resin shelves in the center of the bench. Hardware is included for each installation. …

  • Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • Stainless Steel Four-Shelf Starter Unit, Patented QuadTruss® design wire shelves with numerically calibrated grooved posts in 1" increments, leveling feet and tapered split sleeves

  • Stationary wire epoxy coated shelving is furnished in metroseal 3 epoxy. Corrosion resistant finish for wet or high humidity environments. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for…

  • Perfect for applications involving spillage. Provides barrier between the floor and the bottom shelf contents to deter contamination. Features a 1/8" raised "ship's edge" on all four sides to contain spills. All-stainless steel construction (type 304) to withstand…

  • Wall Standards

    INSTOCK Labs

    Double slotted wall standards are to be used for wall shelving. They vary lengths depending on how many shelves are needed. These are to be used with shelving brackets and shelves. They are of 11 gauge steel construction and 1/2" deep.

  • Similar to 8870J70 Series but with casters Post height is 63”; overall height is 69” The four shelves are adjustable on one inch centers. Each shelving cart has four resilient rubber swivel casters; two with brakes. Capacity is 600 lbs. per cart.

  • 48" vertical upright tube for wall shelving. Vertical rails are easily assembled by hanging rail on horizontal wall shelving rail. Easily adjust spacing anywhere along vertical rails by sliding rail into position. Attach shelves, bin rails, cabinets, etc to vertical tubes for a complete wall…

  • Snaps securely to the front edge of Super Erecta and Super Adjustable Super Erecta Wire Shelving. Gray solid plastic holder puts 1.25" labels on a slant for easier viewing.

  • Oval Rail 48" with mounting holes at 16" centers. Attach the oval horizontal rail at an appropriate height. Take the wall’s inner structure into account. Hang the upright profiles on the horizontal rail, using the hardware supplied. The horizontal rail makes it easy to install…

  • Shelf Spacers for FreeZone Stoppering Tray Dryer. Stainless steel shelf spacers assist stoppering of partial loads of small vials or bottles when placed on empty shelves

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • SiteSelect posts provide a visual guide for positioning and adjusting shelves. An easy-to-identify double groove every 8" offers a quick way to align all shelves. Stationary posts include an adjustable leveling foot. Mobile posts come without leveling bolt assembly to accommodate stem…

  • Mobile Wire Shelving

    INSTOCK Labs

    Mobile wire chrome shelving is made of carbon steel. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for air. Shelves can be adjusted at 1" intervals along entire height of the post. Shelves…

  • Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. Type 304 Polished Stainless…

  • For use with Metro Super Erecta SiteSelect Posts. Promotes easy cleaning by allowing shelving units to be moved easily for access to floors and walls. Create a cart to efficiently move supplies throughout a facility or campus. Stainless horn, axle, and stem with sealed bearings appropriate for…

  • Cross Members

    INSTOCK Labs

    Island cross members are used with island stanchions for stability. They are 2" x 3" and include caps and all installation hardware. They are of a 11 gauge steel construction.

  • Phenolic Shelving

    INSTOCK Labs

    Shelving is 1" thick black phenolic resin with a finished front edge. These shelves can be used with wall standards or island stanchions. Other sizes and configurations are available upon request.

  • Use with Super Erecta posts and shelves to create a mobile shelving unit to meet your special needs. Stem casters are shipped with donut bumper at no additional charge. 5" diameter polyurethane, flat wheel tread with 1.25" face.

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • Notched shelving is 1" thick black phenolic resin with a finished front edge. These shelves are notched to create a pass-thru shelf. They are suited for use with island stanchions. Other sizes and configurations are available upon request.

  • Highest capacity storage for motors, dies and heavy machine parts. Up to 3,250 lbs. per shelf! Boltless assembly. Shelves snap into place and adjust at 1 1/2" increments. Four-way access for easy loading and unloading. 14-gauge steel posts; 16-gauge steel shelves. Tough,…

  • Heated Shelf with Sensor, for use with Bulk Tray Dryer. 200-watt heater ensures efficient heating from -20ºC to 60ºC. A microprocessor in the Bulk Tray Dryer maintains system temperature within 3ºC of set point.

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • Steel Wire Shelving

    Intermetro

    Super Erecta® steel shelving units are easily assembled without tools and are ideal for laboratory, cold box and clean-room storage applications Each Convenience Pak includes: four shelves, four split posts, split sleeves and leveling bolts Zinc plated with a clear lacquer coating Shelving…

  • Stationary wire chrome shelving is made of carbon steel. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for air. Shelves can be adjusted at 1" intervals along entire height of the post.…

  • Innovative polymer stem casters offer corrosion resistance and enhanced durability. Appropriate for all medium-duty mobile applications. Not suitable for cart wash and autoclave applications. All-polymer horn, stainless axle, and hardware. Bumper included with each caster. 5" diameter…

  • Combine with shelves and shelf supports to create a post-type wall mounted shelving solution. Two end brackets are supplied with each of these double-footed posts. One intermediate bracket is supplied with 33" posts. Combine with shelves and shelf supports to create a post-type wall mounted…

  • A complete shelving unit in a single box. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.