Spill Control

Compare Tool

Select up to 3 products

HomeAll Products

NPS Spill Control

1 - 32 of 50
Sort
View
Show

NPS Spill Control

  • Aqualockit helps in the effective clean-up of contaminated water, sludge, neutralized acids or bases or low-level radioactive water. Once solidified you can use a broom and shovel for clean-up. Aqualockit will not gel liquids that are not pH neutral. Aqualockit will absorb 320 gallons of liquid per…

  • Grab & Go® Neutralizer Spill Kits are packed in a 5 gallon plastic bucket for easy portability & disposal of spill clean-up materials. Contains a quart bottle of both acid & base neutralizers. Bucket is rigid and keeps contents protected. Chemical Classifiers can detect other…

  • Indicator powder identifies the presence of mercury in suspected contaminated areas. Powder is easy to use. Simply sprinkle the powder over the suspect are and leave for 24 hours. A pink to reddish brown or black area will appear if mercury is present. 250 g covers 1 to 1.5 square feet.

  • Particulate free These liquid base neutralizers generate less gas and heat during neutralization than dry formulas. Use the liquid formula by spraying on vertical surfaces or pouring into tight corners or hard-to-reach areas. Particulate-free, these liquid neutralizers are designed for the…

  • Chemical Classifier Kits are used to identify unknown liquid hazards in sewers, construction sites, accident sites, storage facilities, landfills, etc. Chemical Classifier Strips identify the following chemical risks: Acid or Base (0-13 pH), Oxidizers 1mg/L (1 ppm), Fluoride 20mg/L (20 ppm),…

  • Many aggressive liquid spills involve hazardous bases that need to be rendered safe for final cleanup and disposal. KOLOR-SAFE dry formula provides a precise method of responding to hazardous base spills. Concentrated formula allows for easy application and greater neutralization capacity.

  • Quickly and easily identifies unknown spills Distinguishes risks in unknown spilled liquids Classifies spills for proper treatment Indoor or outdoor usage Strips quickly indicate the possible presence of a variety of chemicals in unknown liquids. Easy-to-follow chart is available for…

  • This Kit takes up very little space on shelves or table tops. Box has removable perforation to hold contents but keep them visible before use. Components: (1) Quart Bottle Liquid Acid Neutralizer (1) Quart Bottle Liquid Base/Alkaline Neutralizer ( 5) 12” x 12”…

  • Three sizes Three capacities Ready-to-use Truk-Kit is designed to fit behind the back seat of a truck. Kit is packaged in a heat-sealed polyethylene bag. The Economy Kit contains 5 Economy Pads (16” x 18”), 2 Oil-Only Socks (3” x 4’), 1 pair of Nitrile gloves…

  • MERCSORB® Amalgamation Powder is used to convert elemental mercury into an amalgam that stops hazardous mercury vapors from being emitted. Mercsorb absorbs 15 g Hg/100 g carbon. MERCSORB® Amalgamation Kit uses amalgamation powder sponges to absorb the mercury. Store used sponges in the…

  • Dry formula Grab & Go dry acid spill kit is a convenient option for a quick response to many spills. Kit is packed in a 5 gallon plastic bucket for easy portability and disposal of spill clean-up materials. Kit contains 3 Hazmat socks (3” x 4’), 10 lbs KOLOR-SAFE® Dry Acid…

  • Formaldehyde solidifier is for quick response in spill prone areas. Solidifier suppresses formaldehyde vapor as well as solidifying the material for disposal. Formaldehyde Spill Kits are designed to provide and safe and effective method of clean up and vapor reduction in small or large…

  • Premium sorbent for extended-use/high durability Use Hazmat pillows when the liquid is aggressive or unknown as a “no-decision” response Large surface area with high capacity and fast-wicking filler Contain spills and prevent migration Compact design to absorb spills in…

  • Extra-Low-Lint cleanroom products are made with premium Hazmat Sorbents and are encased with an Extra Low Lint heat-pressed material. Extra Low Lint Pads and Rolls provide for a 100% lint-free cleanroom where airborne particles are prohibited.

  • Place this kit in strategic locations for quick response to leaking or spilled battery acid. Ideal locations include garages, forklift storage areas, battery storage areas, etc. Kit is also effective for clean-up dry cell batteries. Get in compliance with OSHA 1910.178(g)(2). Kit contains 2 qts.…

  • Abrasive-resistant Spunbond layer give added strengthNow with a more quilted appearance Premium sorbent for extended-use/high durability Use Hazmat pads when the liquid is aggressive or unknown as a “no-decision” response Yellow color is highly recognized as the universal…

  • Mercury Spill Kit is designed to handle all stages of cleaning up mercury spills. Kit is designed for one time use only. Kit does not contain any chemicals designed to alter the mercury's toxicity or danger. Recommended for use only by trained personnel. Kit contains: amalgamation powder…

  • Premium yellow Hazmat Rolls are for use where there are aggressive or non-aggressive liquid leaks or spills. Rolls are perforated horizontally every 12 and vertically down the center of the roll. Rolls are yellow, widely recognized as the universal ?Caution? color. Good locations for Hazmat…

  • Kit is designed for the decontamination of Personal Protective Equipment (PPE), tools and surfaces at hazardous material incidences or waste sites. Solutions don?t require dilution and are phosphate free. Solutions are not for use on skin. Spill Kit contains 1 each of Decon Solution 1, 2, 3, 4…

  • Proprietary pattern keeps product looking clean and new Two sizes: 15” x 150’ or 30” x 150’ Spilhyder rolls make drips and leaks disappear by drawing and trapping liquids into the highly absorbent inner fine fiber melt blown layer. The top layer remains clean and…

  • 20-, 30-, 55- and 95-gallon kits Absorb up to 16-, 24-, 40-, or 82-gallons Aggressive and non-aggressive spills All poly-drum Hazmat spill kits are designed for either inside or outside storage. The 20-, 30- and 55-gallon kits are durable and feature convenient lever-lock metal ring…

  • Hazmat socks and pillows prevent aggressive liquids from migrating. These sorbents should be used in conjunction with Chemical Classifiers when the spilled material is unknown.

  • Generate less gas and heat during neutralization than dry formulas Use by spraying on vertical surfaces or pouring into tight corners or hard-to-reach areas Color Change process lets you know when Acids are safe to handle to minimize risk. Many aggressive liquid spills involve hazardous…

  • Packed as a portable kit that can also be wall-mounted. Be prepared for spills with chemical spill kits that provide all the supplies necessary to safely clean up oils, acids, caustics, solvents, and toxic spills. Barrier socks contained in Universal Spill Kit are excellent for containment and…

  • Dry formula Grab & Go dry base spill kit is a convenient option for a quick response to many spills. Kit is packed in a 5 gallon plastic bucket for easy portability and disposal of spill clean-up materials. Kit contains 3 Hazmat socks (3” x 4’), 10 lbs KOLOR-SAFE Dry Base…

  • Liquid formula Grab & Go® dry base spill kit is a convenient option for a quick response to many spills. Kit is packed in a 5 gallon plastic bucket for easy portability and disposal of spill clean-up materials. Kit contains 3 Hazmat socks (3” x 4’), 1 gallon KOLOR-SAFE®…

  • Compact kit Absorbs up to 5 gallons Spill kit provides a space saving option for storing sorbent materials in spill-prone areas. Kit contents include 10 pads (12” x 12”), 2 pairs of Nitrile gloves, 2 pair of splash goggles, 10 pillows (8.5” x 17”), 2 poly aprons, 10…

  • Kit provides a space-saving option for storing sorbent materials in laboratories and cleanrooms. All components are poly-bagged and heat-sealed. Kit dimensions are 18.5” x 15.5” x 9”. Compact kit keeps materials clean and dry until use. Contents include 10 light-duty cleanroom…

  • 20-, 30-, 55- and 95-gallon kits Absorb up to 16-, 24-, 40-, or 82-gallons Aggressive and non-aggressive spills All poly-drum Hazmat spill kits are designed for either inside or outside storage. The 20-, 30- and 55-gallon kits are durable and feature convenient with lever-lock metal…

  • Standard use applications. Absorbs oil from water or land while repelling water Float on water to absorb oil spills. Dimple bonded for strength. Vertically perforated for a customized fit. Standard oil-only sorbents are white in color, which creates a high-contrast when used with…

  • Provides a quick and easy solution for cleaning small spills. Lightweight, hi-capacity particulate instantly soaks up liquids, which reduces cleanup time and limits liability exposure. Minimizes slip / fall injuries; Eliminates fire hazards Absorbs and solidifies liquids No hazardous Ingredients…

  •  These universal pads are designed for standard-use applications. Universal sorbents absorb oils, coolants, solvents, water and so much more Standard pads offer great wicking and overall performance. The dimple bond pattern increases the physical strength of the polypropylene in every…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.