Neoprene stoppers can be used in areas where rubber would be attacked by reagents or solvents. Synthetic neoprene stoppers have good resiliency and shelf-life. They withstand petroleum products and oils as well as most inorganic acids and bases. Stopper are green for easy identification. Sold by…

Nonthreaded, wide, thick flanges. Synonyms: flask stopper; flask stoppers; stoppers

Flanged type stopper with a hollow plud and sleeve extension that folds down over the neck of vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, resealing after need is withdrawn.

Similar to CG-3026 and CG-3027 except with two holes. These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with…

Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

Ultra Pure Lyophilization Stoppers are made from a bromobutyl rubber compound containing the highest level of chemical purity. These stoppers demonstrate a very low level of moisture absorption and are ideal for most lyophilization applications. They are compatible with Water for Injection (WFI)…

Standard Grade Size No. 000 is 18 mm long; sizes No. 00 to No. 13 are 25 mm long. Sizes No. 13 1/2, 14 and 15 are 35 mm, 36 mm and 39 mm respectively.

Three twist-off seals permit easy conversion from a solid to a one, two, or three-hole stopper. Soft, resilient, natural rubber demonstrates exceptional aging characteristics and withstands repeated autoclaving. Autoclavable at 250°F for 30 minutes under water or steam conditions only (not…

The recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…

The recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…

SIBATA 47mm Filtration Filter Holder Components are available as replacement components, or to create a customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean…

Sleeve stopper septa are manufactured from pure natural rubber for excellent resealability when used for cannulation techniques or from FKM rubber for high chemical resistance. Natural rubber septa are available in red and white colors and a soft rubber formulation that contains no fillers or…

Closure has a turnover flange molded to grip outside of container neck, promoting a double seal in conjunction with annular serrations on a hollow plug. Annular serrations depress themselves against the inside wall of the bottle neck, making each serration a suction sealing point.Note: For extra…

PTFE stopper adapter is similar to CG-3002-L but with the addition of one female NPT port in the center. The optional PTFE compression fittings provide a convenient way to insert probes or connect PFA tubing or FEP tubing to reactors or flasks. PTFE stopper has an extraction nut permitting easy…

•This narrow ring seal is an alternative to a PTFE joint sleeve •Greaseless protection for air- and moisture- sensitive compounds •Can be used for prolonged storage under vacuum •Slide easily onto medium and full length taper joints •Can be used with Keck® clip and similar metal joint clips …

Silicone stoppers are particularly useful due to their inert and nonreactive nature. It will not impair the growth of tissue cultures and resistant to most chemical acids and solvents. Stoppers can be steam sterilized at 15 lbs. pressure. Broad working temperature range of –62 to 232°C…

Flask length PTFE stopper with color coded handle.

Quality, laboratory grade Cork Stoppers. Available in the following sizes: Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12 Size 14 Size 16 Size 20 Size…

1 pound pack of assorted solid rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 3 each Size 3: 3 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each

Ground glass stopper for 7/10 or 14/20 joint, for use with microscale equipment.

A front-seal, solid plug for sealing column ends. Supplied with one FETFE o-ring.

Full length glass standard taper stoppers with hook.

Solid green Neoprene Withstands exposure to temperatures up to  120°C Usable with petroleum products, vegetable and mineral oils and fats which deteriorate natural rubber Standard length: 26 mm Increased functionality over rubber stoppers at elevated temperatures.…

Hexagonal shaped head of stopper prevents it from rolling off of the bench top. Flat surface will also permit stopper to be inverted and placed on end, thereby preventing possible contamination of ground surface.

Unique seal system allows use as solid or one-, two- or three-hold closures Simplifies stock room inventory Molded of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3)…

Similar to 8771R10 series, but in standard taper joint sizes Conforms to ASTM Standard E 675 Use with boiling and distilling flasks

Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.

This precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…

For use in standard taper outer joints. Economy style with open bottom.

Borosil® Amber Solid Penny Head Glass Stoppers are with Interchangeable Ground Joint and can be used with Volumetric Flask of 5645, 5647 families or for other suitable joints. Manufactured with low extractable quality grade USP Type I, 3.3 Borosilicate Glass confirming to ASTM E438 Class A…