Connections are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures.

With both arms in vertical position. 60mm O.D. x 250mm long. Side arms are 12mm O.D. Available with or without serrated connections on arms. Serrated connectors have six rings: the smallest, 14mm O.D.; largest, 16mm O.D.

Vertical adapter with vacuum take-off and drip tip.

This system is designed for maximum convenience and versatility in the handling of air-sensitive compounds in conjunction with Ace no-air labware or suitably adapted conventional glassware. Complete instructions on assembly, leak testing and preparation of the system are included. Components can be…

Vacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.

Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring joints.

Bump trap for use between a rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser. Improved design incorporates two drain holes to expedite the return of solvent to the evaporator flask.

Same as 8750 except top is bent in line with side tube.,/p>

Configured for Tekmar LSC-1, LSC-2, LSC-2000, 4000a

Contains Molecular Sieve 5 Angstrom, 45/60 mesh Traps can be reconditioned by heating at a minimum of 350°C, with flow for 6 hours. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…

Insect/Vegetation sweeping net 10" Diameter frame 36" lightweight aluminum handle Rubber grip for dependable handling 12" deep nylon net is durable for years of use This net has 10? frame, made of steel wire and 36? light weight aluminum handle with a rubber grip to ensure dependability when…

Across International 500mL glass trap for Ai 2nd Gen T40 -40°C UL/CSA certified cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Attention! This new glass trap ONLY fits our new 2nd Gen UL/CSA certified T40 -40°C cold traps (released 9/2018).

Thomas Nos. 1166V25, 1166V26 and 1166V28 Same as 8746 except adjustable inlet and outlet tubes have six ring hose connections. O.D. of smallest ring is 14mm; largest is 16mm. Thomas Nos. 1166V27 and 1166V29 Vacuum trap,Complete with a 51mm x 250mm body with a hose²connection side…

Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, then connect adapter via 7506 bushing to inlet and outlet of trap. Serrated…

Dewar style trap CONDENSERS designed for large volume solvent removal. Lower reservoir has a capacity of either 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Optional UHMW Lid prevents evaporation of dry…

Twin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…

Vacuum Trap, Cylindrical Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

Distilling trap adapter with outer joint top and inner joint bottom

Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. and may be used with 179730-0808 or 179920-0808 to join multiple bubblers if necessary.

Consists of Body with Ace-Thred, adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach…

Vacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings

Synonym: PURGE TRAP K, O.I. ANALYTICAL 4560

These U-shaped spargers are specially designed for use with Teledyne Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers. 25 mL Fritted Sparger (2000/3000) with 3/4" mount Fritted spargers are recommended for potable water and wastewater samples…

Big Universal Traps utilize a layered, multi-adsorbent bed packing of the most effective, highest capacity adsorbent materials available today for the removal of oxygen, moisture, hydrocarbons, carbon dioxide and carbon monoxide from helium gas streams. The volume of the various adsorbent materials…

Vacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

Bump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.

Vacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm

Distilling trap adapter with standard taper joints.

Foxx Life Sciences’ Vactrap™ G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap™ G safely contains waste produced during supernatant…

The CentriVap Cold Trap collects evaporated liquid from a CentriVap Concentrator, protecting an accessory vacuum pump and the laboratory environment from the corrosive effects of vapors and fumes emitted from samples.   Brushed, Stainless Steel and Powder-Coated Steel Exterior …

Calibrated "to contain" at 20°C, these borosilicate glass moisture traps are used for the determination of water in various materials by distillation with an immiscible solvent. They consist of a full length Standard Taper inner joint for vapor tube connection to distilling flask and…