Advantec MFS
-
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…
-
Available pore sizes: 0.45µm and 0.80µm Color: Black or Green Surface: Gridded Packaging: Individually Wrapped and with or without Absorbent Pad. Pleated band for dispensers available. Advantec Mixed Cellulose Esters (MCE) colored membranes…
-
Sterile Disposable Petri Dishes for 47mm Membranes
Advantec MFSAdvantec Disposable Petri Dishes are ideal for culturing microorganisms on a 47mm diameter membrane filter. The dishes are made of high-quality polystyrene material and are pre-sterilized by gamma irradiation. The dish features a squared edge and a raised ridge for ease of handling and secure…
-
PVC Manifold
Advantec MFSLightweight Resistant to acids Standard cup accepts a No.8 or 8b stopper Lightweight and durable PVC material makes this vacuum manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The standard cup accepts a No.8 or 8b stopper to adapt to…
-
Qualitative Filter Paper, No. 101
Advantec MFSAdvantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates(ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers…
-
25mm All-Glass Filtration Assemblies
Advantec MFSFilter small volumes Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such…
-
Glass Fiber Filters, High Wet Strength
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…
-
Qualitative Filter Paper, No. 131
Advantec MFSAdvantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…
-
PTFE Extraction Thimble Filters
Advantec MFSHigh purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Advantec offers thimble filters in pure PTFE Fiber and PTFE/Silica Fiber. PTFE is inherently hydrophobic…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
PTFE Depth Filters
Advantec MFSPure PTFE (Polytetrafluoroethylene) fibers are sintered to create a unique depth-type filter. These PTFE filters offer superior handling and minimal fiber slough-off compared to glass and quartz filters. Naturally hydrophobic, the media will separate aqueous from non-aqueous phases of mixtures.…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
Quantitative Ashless Filter Paper, No. 5C
Advantec MFSAdvantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and…
-
47mm All-Glass Filtration Assemblies
Advantec MFSGround glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact…
-
Coated Cellulose Acetate Membrane Filters
Advantec MFSAdvantec's Coated Cellulose Acetate composition is cellulose acetate cast onto a non-woven polyester support. It offers low protein binding and is non-fiber releasing. Cellulose acetate has a low static charge matrix with enhanced chemical compatibility to low molecular weight alcohols. The…
-
Quantitative Ashless Filter Paper, No. 4A
Advantec MFSAdvantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and…
-
Qualitative Filter Paper
Advantec MFSAdvantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…
-
47mm Phase/Fraction Collector Filtration Assemblies
Advantec MFSCollect aliquots of filtrate during filtration Two mounting options: No.8 stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under…
-
47mm Glass Vacuum Holder, PTFE Seal
Advantec MFSStandard size for microbiology PTFE seal Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
Sterility Test Manifold
Advantec MFS1-place or 6-place Support cup accepts a No.8 or 8b stopper Features a flushing manifold Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought…
-
Polypropylene Syringe Filter Holder
Advantec MFSThermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…
-
Glass Fiber Filters, Air Monitoring
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…
-
pH Test Papers - Wide Range
Advantec MFSpH Test Papers - Various types of indicator papers cover a wide pH range to allow for good accuracy of determining pH value of a solution. High sensitivity and sharp color change. pH unit graduation for UNIV/WR: 1.0-2.0 units. Dip the indicator test strip in solution and compare to the color…
-
Material Stainless Steel (AISI 304) Max. Pressure 7 bar Quantity 1 Ea. Type Relief Valve
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Hydrophilic PTFE Membrane Filters
Advantec MFSFilter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal…
-
Stainless Steel Gas In-Line Filter Holders
Advantec MFSThreaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…
-
Composite filters ideal for sampling airborne particulates