All metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab clamp - accepts rods up to 3/4" in diameter

150°C Max. Temp. Limit for Filter Base. 

Corning offers a 2" long right angle black anodized aluminum Boss Head clamp that will accept up to 7/16" diameter support rods. It is designed to be used with the Corning Temperature probe support clamp (Cat. No. 440141).

These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

1/2" diameter rod can swing in one plane 22 1/2 degrees in each direction.

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

All stainless steel screw mechanism and anodized aluminum top and bottom plates.

Made from high grade Zinc Alloy, finished in a non-toxic powder coating. Two wide pad metal screws make it easier to securely fasten the bosshead to the support apparatus and clamp. Able to hold rods up to 16 mm in diameter. Holds rods orthogonal (90 degrees) to one another. Eisco Labs proudly…

Base is made of cast iron with a baked black finish. Rod is 10mm O.D. x 600mm (24 ". Available in two sizes.

Powder-coated with plated steel rod

PTFE support ring used to support round bottom flasks or cylindrical reaction vessels.

Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.

Highly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…

Color-coded clamps hold standard taper joints securely under moderate pressure Molded from polyoxymethylene (POM), an acetal resin Will not scratch glass and can withstand temperatures up to 150°C Resistant to bases and weak acids Not resistant to halogen gases and concentrated acids

3 types of clamp heads Flexible arm Versatile support kit features a flex arm that can be placed in virtually any position or angle. Kit includes 12” (30.5 cm) flex arm and interchangeable 3-prong clamp, 2-prong clamp and spring clamp heads.

Two-prong single adjust style tightly controls distances between glassware. Clamp swivels 360° and locks securely into position. Two jaw sizes; one up to 65 mm; the other up to 80 mm. 20 cm center to center distance.

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.

This clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.

The Humboldt Mfg. Co long thumb screw and short thumb screw are suitable for use in research facilities and chemical laboratories while conducting experiments. They are made of high quality material which ensures long lasting usage.

Vertical anchoring of (1/2") lattice frame.

These economical KECK adapters, clamps, and clips will not scratch glass or corrode—ideal for glass and tubing assembly. All KECK products are color-coded for fast, easy size identification. Use quick disconnect adapters for safe, convenient tubing-to-tubing or tubing-to-glass connections.…

Thermometer Clamp features adjustable 360° rotating jaw for suspending thermometers. The clamp attaches to rods up to 13mm (1/2") O.D.

Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap® metering plug.

Corning offers a 7/16" (1.1cm) diameter by 6 1/2" (16.5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3" (9mm) and 0.15" (3.75mm), for holding probes. It is designed to be used with a boss head clamp (Corning Cat. No. 440140) or standard…

Cast iron support stand bases are constructed with black enamel finish for chemical resistance and durability. All bases feature a built-in support rod holder with locking knob that accepts a 0.51" (13 mm) diameter support rod. U-shaped base features three built-in support rod holders and…

Aldrich benchclamp clamps have a nickel-plated finish and are corrosion resistant. The clamps come with slip-on fiberglass finger covers. The Grippy Knob design has a round nut which is easy to turn making tightening the clamps around glassware fast and convenient. Round extension arms allow the…

Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.

The BrandTech ratchet wrench handle is made from strong stainless steel for added strength and is compatible to use with support jacks. Handle can be slided into the hand wheel that makes it easy for lowering and raising the deck.

Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

These brass Stoddard-style test tube clamps are available both with and without finger grips. We also sell test tube clamps made from nickel-plated steel . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State…

Able to adapt to multiple brands of rod mount skeletons Tube Inner Diameter = 12.5mm Cast Iron Heavy Base Heavy Duty Casters Tired of skeleton stands breaking? Tipping Over? Difficult to move? This is the skeleton stand for you. This heavy duty skeleton holder was designed to hold multiple…