Dilution and concentration studies made easy! Transfer solutions between 0.2mL PCR® tubes and 0.5 and 1.5mL microcentrifuge tubes. One side of the rack holds 0.2mL PCR® tubes in standard 96-well format and the other holds 0.5mL and 1.5mL tubes. Ideal for working on concentration studies —…

Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

Removable hinged lid lies flat Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Available in natural, single colors, or assorted colors (one each of…

For Micronic:  Loborack 96 with Standard Cover (H=1 1/4'/31.7mm)  Loborack 96 with High Cover (H=1 1/2"/38.7mm)  For Fluidx:  Low Profile 96 Format for 0.5ml and 0.75ml with Standard Profile Lid (H=1 5/16"/32.9mm)  96 Format Tube with Protective Jacket…

Security locking devices are made of high quality stainless steel and secured with a lock for each system; Locking devices are available for all racks. Protect your samples from unauthorized access by using these security lock devices. No tools are required for installing lock devices.

Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…

Easy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…

Test tube support with 7/8" diameter holes, holds 12 tubes.

SHAKER RACK FOR 50ML BIOREACTION TUBES, Stainless Steel Construction Angle Adjustment of up to 30° Silicone Gasket Holds Tube Securely Can be used with Skirted or Standard Tubes Fits All Shakers with a top plate of at least 14” x 14” Our unique 49…

Sturdy racks for transport or sample handling These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL…

Corning CoolSink thermo-conductive plate and reservoir modules provide uniform temperature to all wells, regardless of position. When placed onto a temperature source such as ice, dry ice, liquid nitrogen or water baths, the CoolSink module will rapidly adapt to that temperature - from -196°C…

Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…

Linear low-density polyethylene Safety yellow color Molded to hold bottles at both top and bottom, preventing any contact between them. Base has three sockets on either side and integral handle in the center. Top fits down over the handle and snap-locks at both ends of base. Sockets in top hold…

This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…

28-Place Holds 28 pipets in vertical position Pipets fit into 2 discs connected by central support column Upper disc has 10 holes, 14 mm in diameter and 18 holes, 11 mm in diameter Lower disc has 28 holes, 4 mm in diameter to support pipet tips Overall height 7"; diameter 7"H …

The CRYSTAL 81 cell chest freezer rack measuring 5-1/2 Inch x 5-5/8 Inch x 15-1/16 Inch, features sturdy construction which ensures durability. It holds up to 7, 2 Inch standard boxes. Rack features box and divider for easy and convenient organizing of sample storage. Application: For Standard 2…

Upright Freezer Drawer Rack for storage bottles, 2 drawers 22 x 9 15/16 x 5 1/2" (L x H x W)

Holds up to eight 250-500 mL bottles (bottles not included) Bottles held securely by bottom pan depression and upper grid Telescoping handle stays out of the way for convenient storage Rack will not tip over Autoclavable

These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have…

Hand Disperser (Ecoline), dispersing devices for budget-conscious labs. This ergonomic hand disperser is lightweight and therefore ideal for rapid turnaround of smaller sample volumes. The extensive range of dispersing aggregates covers a wide range of sample preparation…

Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low (-80 deg) freezers on the market; racks are designed for ultra low upright freezers. Application: For 96-Well & 384-Well Microtiter Plates Made of…

96-well rack is ideal for the storage and handling of Axygen 0.2mL and 0.5mL PCR tubes Fluorescent color: blue, green, violet, red, yellow Made of polypropylene Lids included Durable, chemically inert, and can withstand extended duration at sub-zero temperatures 5 Racks/Unit; 5 Units/Case

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 12 each 5 ml microcentrifuge tubes, 12 mm in diameter Overall dimensions…

Upright Freezer Slide Rack for 36 PCR Boxes, Fits standard 96 x 0.2ml boxes and Matrix 500ul latch rack boxes. Fits Phenix part number: RPC-266.

Polypropylene Co-Polymer rack is lightweight, stackable and autoclavable. Rack comes flat and is folded and snapped into place for use. Rack remains collapsible for flat storage when not in use and measures 246 x 104 x 64 mm when assembled. Lightweight, stackable, and autoclavable. Collapsible to…

Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low (-80 deg) freezers on the market; racks are designed for ultra low upright freezers. Application: For 3.75 in High Standard Boxes These drawer racks…

ABS ET Series  Includes 6 Canisters ½ CC Straw (1 Level Bulk): 1122 Static Evaporation Rate (Liters/day): 0.13 LN2 Capacity: 3.6 Normal Working Time: 17 Days   Neck Diameter (mm): 55.4 Exterior Height (mm): 406.4 Exterior Diameter (mm): 220.9 …

Drying Rack, Pegboard, Acrylic, Glassware Our acrylic pegboards are made out of 3/4" thick clear acrylic. Pegboards can be supplied with a frosted back to diffuse light, if desired. Pegs are available in white or black and in three different lengths. Bevels can be added at the bottom to pitch…

The Argos Technologies vertical rack measuring 3-1/4 Inch x 3 Inch x 33-1/2 Inch, features anti corrosive construction of stainless steel material which ensures durability. It holds up to 6, 2 Inch boxes. Rack comes with a locking rod which ensures added security to the boxes.

These racks are manufactured of clear acrylic shelves with white bases and sides. For typing, screening and other blood bank applications. For blood donor processing. Holds donor sample tubes as well as tubes for donor’s serum and cell suspension, ABO, Rh, antibody grouping and screening.

Ideal for washing and storing test tubes Use these lightweight yet strong baskets with mechanical washers and autoclaves. Durable construction will withstand repeated use in the lab.