Specialty Flasks
Specialty flasks are the backbone of many experimental setups, offering the durability and precision needed for demanding experiments.
Explore our diverse collection, including round bottom flasks, single neck flasks, bioreactor flasks, Ace Glass freeze-drying flasks, and 4 neck flat flange reaction vessel covers. All flasks are carefully designed to withstand the requirements of multiple research and analysis procedures.
In this category, you'll discover renowned brands such as Chemglass, Ace Glass, and Kemtech America, all known for their commitment to quality and innovation in lab glassware.
Whether you're searching for a Schlenk flask, a three-neck round bottom flask, a biomass flask, or a 3-neck flask for your lab, we offer a selection of flask options suitable for a range of experiements. Trust our specialty flasks to provide the precision and durability your research demands.
-
Round bottom, borosilicate glass flask for NO-AIR and vacuum applications. Side arm has outer standard taper joint for adding into schlenk and vacuum lines. 0-4MM Hi-Vac valve gives precise control of inlet/outlet flow.
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Round bottom, HEAVY WALL, three-flask with standard taper outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. Indentations increase agitation of the contents of the flask during stirring. …
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Flasks, Heavy Wall, Pear Shaped
ChemglassPear shape HEAVY WALL flask with a standard taper outer joint.
-
Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. For Larger Flasks See CG-1524.
-
Flat bottom borosilicate flask for use with Labconco and Virtis freeze dryers. Wide mouth design provides easy access sample. PLEASE NOTE: FLASKS ONLY. NOT SUPPLIED WITH RUBBER TOP, FILTER OR O-RING. Note: Labconco and Virtis are not related to or affiliated with Chemglass, and…
-
SYNTHWARE Transfer/Storage Flasks
Kemtech AmericaSYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.
-
Round bottom, HEAVY WALL, three neck flask with standard taper outer joints on the center and side necks. Lower outlet is a CG-424-05, 4mm straight bore PTFE stopcock.
-
Heavy Wall blanks are 30% heavier than our standard CG-618 series. Blanks are used in the fabrication of single or multi-neck round bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Flasks, PFA, Round Bottom, Three Neck
ChemglassAll PFA three neck round bottom flask with standard taper outer joint center neck and two additional 20° angled side necks. Allows assembly with a temperature probe, electrode or tube. Flask can withstand MAX temperature of 250°C and a MIN temperature of -200°C.
-
Spherical Reaction Flask
Ace GlassRugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea
-
-
SYNTHWARE Storage Flasks with Outer Joints
Kemtech AmericaSYNTHWARE storage flask with standard taper outer joint and high vacuum valve. Valve has a PTFE o-ring at the tip. Valve is used to control liquid or gas flow into the flask.
-
Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid.
-
SolventVap Receiving Flask 1/2Drain Port with PTFE Valve
Across InternationalHigh quality glass drain port with PTFE open/close valve for Ai 3L, 5L, 10L, 20L receiving flasks. Glass material: high borosilicate glass 3.3
-
Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and vertical side neck.
-
Round bottom storage flask with a standard taper outer joint on the sidearm. The 50, 100 and 250mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 500 and 1000mL sizes have a 0-8mm valve size.
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
With three necks and PTFE plug (5mm bore on 5000mL, 4mm bore on all other sizes) stopcock outlet. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. For stopcock plugs, see 8224. For heating mantle, see 12039
-
Coupling, Reaction Flask
Ace GlassKF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…
-
Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304…
-
VITLAB, PFA Round Bottom Flasks
BrandTech®These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…
-
Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and 20º angled side necks.
-
Cylindrical Reaction Vessels with O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.
-
SYNTHWARE Modified Schlenk Flasks with High Vacuum Valves
Kemtech AmericaSYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…
-
3 Neck Reaction Vessel/Kettle Cover
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…
-
SYNTHWARE Reaction Vessel, Photochemical
Kemtech AmericaReaction Vessel, Photochemical, Synthware, Joint: 14/20 + 24/40, #50 Internal Top Thread, #7 Arm Side Thread, 500mL Capacity.
-
Equilibration Flask
Ace GlassDesigned by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Flask, Single Neck, Pear Shaped
Ace GlassPear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)