Designed to help prevent contamination during use Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents Replaceable supports available Filter size: 47 mm; 3/8” hose connection A ground joint connection eliminates…

Ensure complete sample transfer with these disposable antistatic polypropylene weighing funnels that are designed to fit in volumetric flasks. One side of the funnel is flattened so you can set the funnel flat on a balance. Micro funnel is designed to fit microwell plates. Please note that…

For standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable

Ai 24/40 standard taper joint glass funnel.

Manufactured with 304 Stainless Steel, United Scientific™ REUZ™ (“re-use”) Stainless Steel Funnels include an air channel engineered for smooth, easy flow. Useful in laboratory or factory environments, the versatile funnels can be used with most liquids and powders. Carefully constructed, the…

Funnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…

Separatory Funnel, Squibb, Glass Stopcock, Synthware, Capacity: 30-1000mL available, Stopper Size: #13, #16, #22, or #27, Stopcock Bore: 2 or 4mm, Supplied with flask length glass stopper.

Kimble 28400 With fused-in fritted discs Designed from Federal Specification DD-F-776 Dimensions are identical with corresponding sizes of 5220F28 series. Type designates capacity (in mL) and porosity.

for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

Separatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper

Cloning cylinders are used to surround a single cell to create homogeneous culture of cells rather than mixed population Flat end insures tight sealing with surface of culture dish

Fully compatible with the Shandon CytoSpin® Centrifuge, Simport CytoSep™ Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. These Cytology Funnels have the filter cards pre-attached for…

Autoclavable plastic separating funnel Excellent clarity and strength Leak-proof threaded screwcap This durable polypropylene separating funnel is a fantastic alternative to the fragile glass lab ware that so often finds itself in pieces on the counter or floor. It has a threaded,…

The CoorsTek hirsch funnel with fixed perforated plate, is designed to separate solids from liquids by allowing the liquid to pass through the filter medium. The interior and exterior of the funnel are glazed.

Squibb-style dropping/separatory funnels with glass key stopcock used for precise, controlled dispensing of liquids Made of high quality borosilicate 3.3 glass with superior durability and heat tolerance Features a ground glass socket fitted with an interchangeable plastic stopper Designed…

Similar to 9495, except lower stopcock is solid 1:5 PTFE metering valve, side arm plug is regular 1:5 solid PTFE. For replacement plugs, see 8232 or 8224.

Fritted filter funnel has a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-961-01 0-4mm Chem-Vac™ Chem-Cap® valve. Top outer joint is the same size as the lower inner joint. Capacity listed is that above the fritted disc.…

With two chambers, cell deposit areas are close together and easy to find, helping to speed sample analysis. Two deposit areas on one slide enhance all of the advantages of the popular single chambers. Reduced time spent loading and unloading slides. Two cell deposit areas on the same slide…

Table-top Buchner funnels with medium porosity (45-90 microns) (90-130 microns) removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16")…

Glass stopcock and glass stopper Stem length of 65 mm

These Separatory Funnels are made from quality borosilicate glass, and come with a glass stopcock. They are commonly used in liquid-based extractions to separate the parts of the mixture into two solvent phases of different densities. PRODUCT WARNINGS WARNING: This product can expose…

Duran® heavy wall filtering flask has a unique removable PPN hose connection. Hose connection is secured to the flask via a silicone rubber seal. Bottle shape filter flask, PLASTIC COATED, with removable PPN hose connection. For replacement PPN hose connection sets see CG-1563.

Lightweight and durable Bottom and top can be separated for easier cleaning Autoclavable

MICROFILTRATION WITH GROUND JOINT The 90 mm filtration assembly with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter.  This unit is also recommended for…

Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.

Cylindrical style addition funnel with a standard taper top outer joint and lower inner joint, both being the same size. With pressure equalizing arm and PTFE stopcock. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper. For replacement stoppers see CG-3000.

Addition Funnel, Pressure Equalizing, PTFE Metering Stopcock, Synthware, Capacity: 10-500mL available, Top Joint (Outer): 14/20, 19/22, and 24/40 available, Bottom Joint (Inner): 14/20, 19/22, and 24/40 available, Stopcock Bore: 2 or 4mm.

Reduces difficulties in handling narrow dialysis bags. Dialysis tubing is cut to length and knotted at the end. The other end is slipped onto the tube and held with Silicone Rubber Loops, or a rubber band. Three tube steps fit various sizes of dialysis tubing Triple notched universal…

CYLINDRICAL Cylindrical glass dropping funnel/separatory funnel TRANSPARENT & DURABLE Made of high quality Borosilicate 3.3 glass - Transparency allows for high visibility FOR SEPARATION Used to transfer liquids - Using the stopcock allows fluids, including reagents, to dispense…

Same as the standard 4" ECO Funnel, but with the addition of an HPLC waste hook adapter that connects to the side of the funnel eliminating the danger of dangling waste lines into bottles and containers.

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

This unique separatory funnel is manufactured with a removable PTFE stem that virtually eliminates breakage normally associated with standard glass stem stopcocks. Made entirely of PTFE, the stem attaches directly to the glass stopcockwithout o-rings or other gaskets. Glassware equipped with…