Originated by Sampling Systems™ over 20 years ago and is a firmly established world leader in powder sampling. The Powder Thief is extensively used throughout the pharmaceutical, chemical and food industries around the world. The PowderThief is suitable for sampling free flowing powders…

Designed to gather small amounts of sample material, especially in hard to reach containers. Long handle reaches into jars, bottles and other confined areas Minimizes the potential of personal contact with sampled material Sterile, FDA grade polystyrene safe for food, drug and…

Small female luer to 2. 4mm barb, PVDF (10 pack)

Enable samples of liquid or powder to be taken and sent for testing in the same container, eliminating risk of cross contamination. Sterile Available in blue and clear The handle can be neatly snapped off once the sample has been taken. All Dippas come individually wrapped and…

Reduce cross contamination while sampling low viscosity liquids and oils Manufactured in Class 100,000 cleanroom and individually packaged Constructed of chemically inert high-density polyethylene (HDPE) The liquid sampler collectors are designed to easily take liquid samples with the…

UltraSnap ® is a user-friendly, all-in-one ATP sampling test used with Hygiena ® luminometers. This pen-sized sample collection device is easy to use, small, and environmentally friendly. In addition, UltraSnap ® uses a unique liquid-stable reagent providing superior accuracy,…

DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml, up to 200 ml. An ergonomic handle and a spout on both sides for right or left-hand operation make handling simple and easy. …

The PerkinElmer sample with a volume capacity of 2 uL is made from sturdy PEEK material and is mainly used in laboratory and manufacturing factories.

The user friendly SPB Digital Controller includes programmable features such as: temperature set-point to 0.1 C, even sample heating and evaporation results, timer shutdown option, and programmable alarm for end of cycle.

Dynalon’s new versatile modular liquid handling series fits all your needs. Whether sampling from drums or rail cars, stirring vats or dipping chemicals from a bath... we have the configuration to fill your requirements. Components are available piecemeal, as intuitive kits or buy the…

The range of Stainless Containers from Sampling Systems are ideal for use with powders and liquids. The high-quality crevice free finish makes these containers ideal for demanding applications. Multi-purpose containers Robust construction Crevice free interior for easy cleaning …

Ideal for sampling unknowns from open-top drums and tanks Manufactured from chemically resistant polypropylene The E-Z Sampler® has a 39” (100cm) head/shaft assembly and is supplied with a 125mL borosilicate glass bottle with a PTFE lined cap Filling ports are located above the bottle to…

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling. Specially developed for viscous substances such as slurries, silt, wet clay and soil samples, soil…

Available in two lengths to suit your needs, these sterile liquid thieves draw a sample with a simple pull of the handle, then dispense easily into the vessel of your choice. Ideal for sampling water and other low viscosity liquids, oils and ointments; 0.15cm (¹⁄16") tip hole…

Mini-Pots from Sampling Systems are high quality containers made from 316L Stainless Steel. They have a crevice free interior and are widely used in the pharmaceutical & chemical laboratories worldwide. Available in a range of sizes Satin finish Multi purpose small volume containers …

For sampling liquids and suspensions. The device is manufactured from 316 stainless steel. The Cup Sampler enables discrete samples to be easily taken from a height within the product. Key Features: 316L Stainless Steel Construction Single point liquid sampler Operation: Insert…

Measuring scoops of polypropylene and polyethylene in a variety of sizes. Volume marked in mL on the handle.

The SteriPlast® Bio sample spoon made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

The long handle of the sample scoop makes it possible to take samples even from places that are difficult to reach, for example large containers with very little content. The high rim prevents the sample from spilling after it is taken. The light design of the stainless steel scoop ensures…

Pure•SAL™ was developed for the controlled and standardized collection of RNA or protein biomarkers from oral fluid specimens for subsequent stabilization and analysis in life science and research applications. The Pure•SAL™ Oral Specimen Collection Kit provides a simple…

Radial Window O-Ring

Complies with FIL and IDF specifications for sampling of powdered milk Constructed of chromium plated brass with light alloy handle Sterilizable Applications: powdered milk, flour, sand, cement; sites of use: dairy, food, feed and chemical industries. To use, the sampler is…

The bench top fume hoods for SPB systems are the right choice for trace-metal digestions. Made from clear, acid resistant polycarbonate with a solid surface material base, the fume hood eliminates the risk of trace-metal contamination common with traditional fume hoods. HEPA ® filters ensure clean…

Cover Gasket to house the stopcocks are available for purchase with either 12 or 24 stopcocks options.

Burkle MultiDispo Disposable zone samplers for taking samples from multiple layers of the sample material (25mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of liquids,…

Heavy-duty construction prevents cracking or tipping. Conical design allows for use of entire sample. Recommended for use with most concentrated acids including HF and for analyses where the lowest detection levels are required.

Graphite blocks are PTFE-coated to resist aggressive corrosive attack for guaranteed long life in harsh laboratory environments. Our sample blocks operate with either a SPB Digital Controller or SPB Touch Controller*. Please select a controller below and the appropriate Start Up Kit* which includes…

These 250 mL polyethylene wide mouth bottles have dimensions 61 mm outer diameter by 130 mm height.

For sampling liquids and suspensions. The device is manufactured from 316 stainless steel. The Cup Sampler enables discrete samples to be easily taken from a height within the product. Key Features: 316L Stainless Steel Construction Single point liquid sampler Operation: Insert…

Available in two lengths each with four tip volumes, these sterile powder thieves easily sample from targeted locations within bulk powders. Used by pharmaceutical, food, cosmetic and chemical companies. Made from FDA and EU conforming materials; safe for food, drug and cosmetic use High…

The gentle collection and lysis chemistry of the alcohol-free iSWAB buffer allows for recovery of double-stranded, large fragment DNA similar to the genomic DNA generated from blood, making it suitable for complex genomics downstream arrays such as microarrays and Next Generation Sequencing. Other…

For busy labs, additional acid resistant, polycarbonate Racks are available for all SPB systems. Exclusive RackLock feature locks DigiTUBEs in position within the rack allowing for easy, one-handed closure of screw cap.